Design and Characteristics of Side Bushing of Converter Valve Based on Forced Air Cooling Technology

被引：0
|
作者：
Liu S. [1 ]
Hou J. [2 ]
Zhou J. [1 ]
Wang H. [1 ]
Zhou L. [2 ]
Han X. [3 ]
机构：
[1] State Key Laboratory of Advance Power Transmission Technology, Global Energy Interconnection Research Institute Co., Ltd., Beijing
[2] Beijing DC T&D Engineering Technology Research Center, China-EPRI Electric Power Engineering Co., Ltd., Beijing
[3] XIAN XD High Voltage Bushing Co., Ltd., Xi’an
来源：
Gaodianya Jishu/High Voltage Engineering | 2022年 / 48卷 / 11期
关键词：
air cooling; air cooling system; overheating; temperature rise test; valve side bushing;
D O I：
10.13336/j.1003-6520.hve.20211854
中图分类号：
学科分类号：
摘要：
The epoxy core with low thermal conductivity makes it difficult for the side bushing of converter valve to dissipate heat, resulting in excessive temperature, which seriously endangers the safe operation of the bushing. Meanwhile, strict requirements should be met in the production process of the core body, which restricts the development of the localization of the bushing. In response to this problem, this paper proposes a valve-side bushing (referred to as air-cooled bushing) technology based on forced air cooling. The thermoelectric-fluid-structure coupling simulation model of the air-cooled bushing is established, and the temperature, current-carrying and transient characteristics of the air-cooled bushing are analyzed. On this basis, the ±800 kV valve-side air-cooled bushing prototype is developed and verified by tests. The results show that the air-cooled bushing technology can be utilized to effectively reduce the bushing temperature, improve the temperature uniformity, and increase the flow capacity by 45%. Therefore,this technology can be utilized to effectively solve the problem of overheating of the bushing, and it is one of the effective ways to improve the reliability of the bushing and complete the replacement of localization. © 2022 Science Press. All rights reserved.
引用
收藏
页码：4478 / 4487
页数：9
相关论文
共 23 条
  • [1] LIU Zhenya, Ultra-high voltage AC & DC grid, pp. 18-20, (2014)
  • [2] GU Chen, LI Peng, HE Huiwen, Et al., Research on ±1 100 kV and above UHV DC transmission technologies, Proceedings of the CSEE, 40, 20, pp. 6745-6753, (2020)
  • [3] LAN Zhenbo, SONG You, DENG Jiangeng, Et al., Status and application of UHV AC/DC bushing in China, Insulators and Surge Arresters, 2, pp. 1-6, (2021)
  • [4] DENG Jun, WU Zehua, ZHOU Shiyi, Et al., Calculation of temperature distribution on converter transformer rip bushings and analysis on factors of influence, Insulators and Surge Arresters, 5, pp. 164-168, (2018)
  • [5] WANG Qingyu, YANG Xi, PENG Zongren, Et al., 3D coupled electromagnetic-thermal-fluid method for computation of temperature field of converter transformer RIP bushings, Proceedings of the CSEE, 36, 22, pp. 6269-6275, (2016)
  • [6] TANG Hao, LI Jinzhong, ZHANG Hejun, Et al., Axial and radial temperature distribution of the valve side bushing in UHVDC converter transformer under high ambient temperature and large current, Proceedings of the CSEE, 37, 18, pp. 5494-5503, (2017)
  • [7] WANG Shengjie, BAO Zhenghong, LIN Wande, Et al., Simulation study on temperature rise of converter-side bushing in converter transformer at high altitude, Transformer, 58, 2, pp. 47-51, (2021)
  • [8] WEN Miao, LIN Xin, ZHONG Simeng, Et al., Numerical simulation and experimental study of heat transfer characteristics in transformer bushing, High Voltage Engineering, 42, 9, pp. 2956-2961, (2016)
  • [9] YAO Lina, LIU Hua, ZHANG Jun, Et al., Urgent replacement of valve side bushing of large converter transformer, Electric Power, 44, 8, pp. 22-25, (2011)
  • [10] XIE Chao, LIU Hongtai, SHENG Kang, Et al., Analysis of valve-side bushing failures in converter transformers, Southern Power System Technology, 5, 2, pp. 95-98, (2011)
123