Experimental and modeling investigations of high temperature DSA behaviour for GH4169 superalloy

被引:0
|
作者
Song R. [1 ]
Qin H. [2 ,3 ]
Bi Z. [2 ,3 ]
Zhang J. [2 ,3 ]
Zhong Z. [1 ]
Li D. [1 ]
机构
[1] School of Science, Harbin Institute of Technology, Shenzhen
[2] Beijing Key Laboratory of Advanced High Temperature Materials, Central Iron and Steel Research Institute, Beijing
[3] Beijing CISRI-GAONA Materials and Technology Co., Ltd., Beijing
关键词
Constitutive model; Dynamic strain ageing (DSA); High temperature tensile test; Negative strain rate sensitivity; Solid solution treated GH4169;
D O I
10.11918/201903131
中图分类号
学科分类号
摘要
To understand the influence of the dynamic strain ageing (DSA) phenomenon on the mechanical properties of GH4169 superalloy during heat treatment, experimental and modeling investigations of DSA were carried out for solid solution treated nickel-based GH4169 superalloy at elevated temperature. Uniaxial tensile tests at 620 ℃ with strain rates of 10-2, 10-3, and 10-4 s-1 were performed to characterize the DSA effect, and negative strain rate sensitivity and serrated yielding behaviours were identified. Through the use of a thermal activation based viscoplastic flow rule with the DSA effect incorporated, a one-dimensional constitutive model was established. The deformation resistance was divided into two parts, i.e., slip resistance and deformation resistance caused by DSA effect. Two internal variables, equivalent ageing time and waiting time, were introduced to describe the DSA effect, and a least-squares method was adopted for parameter fitting. Comparison show that the calculated results of the constitutive model were in good agreement with the experimental results. The slip resistance increased with the increase of strain rate, whereas the deformation resistance caused by DSA effect decreased with the increase of strain rate. It further indicates that the identified negative strain rate sensitivity is the result of the competition between DSA effect and normal rate effect in certain strain rate range. © 2020, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
下载
收藏
页码:21 / 26
页数:5
相关论文
共 18 条
  • [1] QIN Hailong, BI Zhongnan, YU Hongyao, Et al., Assessment of the stress-oriented precipitation hardening designed by interior residual stress during ageing in IN718 superalloy, Materials Science and Engineering: A, 728, (2018)
  • [2] HAN Yafang, The coarstning bthaviour of γ" and γ' particles in inconel 718, (1982)
  • [3] DU Jinhui, LU Xudong, DENG Qun, Effect of solution treatment on the microstructure and mechanical properties of IN718 alloy, Rare Metal Materials and Engineering, 46, 9, (2017)
  • [4] REZENDE M C, ARAUJO L S, GABRIEL S B, Et al., Oxidation assisted intergranular cracking under loading at dynamic strain aging temperatures in Inconel 718 superalloy, Journal of Alloys and Compounds, 643, S1, (2015)
  • [5] FISK M, ANDERSSON J, DU RIETZ R, Et al., Precipitate evolution in the early stages of ageing in Inconel 718 investigated using small-angle x-ray scattering, Materials Science and Engineering: A, 612, (2014)
  • [6] BENALLAL A, BERSTAD T, B∅RVIK T, Et al., An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin-Le Chatelier effect, International Journal of Plasticity, 24, 10, (2008)
  • [7] MARCHENKO A, MAZIERE M, FOREST S, Et al., Crystal plasticity simulation of strain aging phenomena in α-titanium at room temperature, International Journal of Plasticity, 85, (2016)
  • [8] GOPINATH K, GOGIA A K, KAMAT S V, Et al., Dynamic strain ageing in Ni-base superalloy 720Li, Acta Materialia, 57, 4, (2009)
  • [9] MCCORMICK P G., Theory of flow localisation due to dynamic strain ageing, Acta Metallurgica, 36, 12, (1988)
  • [10] REN Sicong, MAZIERE M, FOREST S, Et al., A constitutive model accounting for strain ageing effects on work-hardening. Application to a C-Mn steel, Comptes Rendus Mécanique, 345, 12, (2017)