Design and implementation of a structural subsystem of Chang'e-5 probe

被引：0

作者：

Dong Y. ^{[1
]}

Zhang G. ^{[1
]}

Yang C. ^{[1
]}

Zeng H. ^{[1
]}

Deng Y. ^{[1
]}

Wang Y. ^{[2
]}

Sheng C. ^{[1
]}

Liu F. ^{[1
]}

机构：

[1] Institute of Spacecraft System Engineering, China Academy of Space Technology, Beijing

[2] Aerospace System Engineering Shanghai, Shanghai

来源：

Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica | 2021年 / 51卷 / 08期

关键词：

Chang'e-5; Design; Implementation; Probe; Structural subsystem;

D O I：

10.1360/SST-2021-0137

中图分类号：

学科分类号：

摘要：

The Chang'e-5 probe has achieved the first unmanned lunar surface sampling and return mission in China. The probe faced several technical challenges, including complex configuration, high lightweight and precision requirements, and strict environmental and load conditions. The design scheme of the whole structure and substructure of the probe is briefly introduced in this paper. Particularly, for key technical problems, such as the lunar surface sampling, lunar orbital rendezvous and docking, and returning lunar samples to the earth at high speed (11 km/s, close to the second cosmic velocity), this paper expounds on the research contents of the lightweight of the lander and ascender, high-precision composites structure design method, structure scheme of the takeoff platform with the integrated heat-resistant and load-bearing technology, design of the returner bond buffer to adapt to the impact of oblique landing, and labyrinthine thermal-seal design of the hatch door. The results of the mission show that the design of the structural subsystem of the Chang'e-5 probe is a complete success. © 2021, Science Press. All right reserved.

引用

页码：886 / 897

页数：11

共 10 条

[1] Luo W B, Zhang X W, Qian Z Y, Et al., Dimensional stability analysis of the satellite structure based on in-orbit temperature measurement data, Chin Space Sci Tech, 41, pp. 22-28, (2021)
[2] Yang G, Liu B, Li Z J, Et al., Simulation analysis of the influence of quality characteristics on spacecraft pyroshock transmission, Chin Space Sci Tech, 40, pp. 62-69, (2020)
[3] Wang X J., Spacecraft Entry and Return Techniques, (2009)
[4] Chen L M., Spacecraft Structure and Mechanism, (2008)
[5] Yang M F, Zhang G, Zhang W, Et al., Technique design and realization of the circumlunar return and reentry spacecraft of 3rd phase of Chinese lunar exploration program, Sci Sin Tech, 45, pp. 111-123, (2015)
[6] Dong Y Z, Liu F, Yang C H, Et al., Design and verification of the TPS of the circumlunar free return and reentry flight vehicle for the 3rd phase of Chinese lunar exploration program, Sci Sin Tech, 45, pp. 151-159, (2015)
[7] Ma X, Zhou Q, Li M T, Et al., Overall technology analysis and efficiency simulation of the deep space impactor, Chin Space Sci Tech, 41, pp. 120-130, (2021)
[8] Wang G, Dong Y Z, Yang C H, Et al., Aerospace embedded software dependability guarantee technology and application, Sci Sin Tech, 45, pp. 204-212, (2015)
[9] Zhang C, Wang G, Liu F, Et al., Design and verification technology of plume guiding device on lander roof, Spacecr Recovery Remote Sens, 37, pp. 34-41, (2016)
[10] Li F, Ling D S., Survey of the developing in engineering structural optimization design, J Eng Design, 9, pp. 229-235, (2002)

← 1 →