Microstructural Damage Analysis of Service Turbine Blades for an Aero-engine

被引：1
|
作者：
Fan Y. [1 ]
Huang W. [1 ]
Yang X. [1 ,2 ]
Shi D. [1 ,2 ]
机构：
[1] School of Energy and Power Engineering, Beihang University, Beijing
[2] Beijing Key Laboratory of Aero-engine Structure and Strength, Beihang University, Beijing
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2019年 / 55卷 / 13期
关键词：
Hardness; Low cycle fatigue; Microstructural damage; Service; Turbine blades;
D O I：
10.3901/JME.2019.13.122
中图分类号：
学科分类号：
摘要：
Working under the severest condition, turbine blade is the most important and crucial part of aero-engine. The working performance of the whole aero-engine highly depends on turbine blades. Damage inevitably occurs on the turbine blades during operation. As turbine blades are expensive and difficult to manufacture, ensuring the blades work reliably and making full of the turbine blades are important for safety service aero-engine. The microstructural damage in the service process of the turbine blade of an aero engine is investigated and summarized. The results show that the microstructural damage is mainly based on the coarsening and rafting of the precipitate phases. A set of evaluation methods characterized by precipitate phase size is established. Hardness test of turbine blades is carried out. The result shows that with the degradation of microstructure, the hardness in various positions of the blades decreased. Finally, the low cycle fatigue test was carried out at 850℃/810 MPa for different heat exposure conditions of the turbine blade materials. The results show that with the degradation of microstructure, the low cycle fatigue properties of the alloy decreased, indicating that the fatigue resistance of the turbine blade materials declined with microstructural damage. © 2019 Journal of Mechanical Engineering.
引用
收藏
页码：122 / 128
页数：6
相关论文
共 31 条
  • [1] Reed R.C., The Superalloys: Fundamentals and Applications, (2006)
  • [2] Liu D., Spasic J., Chen G., Et al., Energy-efficient mapping of real-time streaming applications on cluster heterogeneous MPSoCs, IEEE, pp. 1-10, (2015)
  • [3] Cai X., Qi S., Wu C., Et al., Investigation on the protect criteria of aero-engine static strength design, Journal of Mechanical Engineering, 53, 13, pp. 101-107, (2017)
  • [4] Jiang T., Yan H., Wang Z., Et al., Rolling self-evolution of an aero-engine assembly shop in uncertain knowledgeable manufacturing environment, Journal of Mechanical Engineering, 53, 1, pp. 165-173, (2017)
  • [5] Ren H., Xiong H., Wu X., Et al., Research advances on the dissimilar joining of titanium aluminides and nickel-based superalloys, Journal of Mechanical Engineering, 53, 4, pp. 1-10, (2017)
  • [6] Feng Q., Tong J., Zheng Y., Et al., Service induced degradation and rejuvenation of gas turbine blades, Materials China, 31, 12, pp. 21-34, (2012)
  • [7] Carter T.J., Common failure in gas turbine, Engineering Failure Analysis, 12, pp. 237-247, (2005)
  • [8] Jahangiri M.R., Effect of long time service exposure on microstructure and mechanical properties of gas turbine vanes made of IN939 alloy, Materials and Design, 64, pp. 588-600, (2014)
  • [9] Yu J., Sun X., Zhao N., Et al., Effect of heat treatment on microstructure and stress rupture life of DD32 single crystal Ni-base superalloy, Materials Science & Engineering A, 460-461, pp. 420-427, (2007)
  • [10] Tian S., Zhang B., Yu H., Et al., Microstructure evolution and creep behaviors of a directionally solidified nickel-base alloy under long-life service condition, Materials Science & Engineering A, 673, pp. 391-399, (2016)
1234