Research progress of hydrometallurgical recovery and utilization of valuable metals from secondary resources

被引：0
|
作者：
Xu T. [1 ]
Zhong Y. [1 ]
Xie J. [1 ]
Ge J. [1 ]
Wang M. [1 ]
机构：
[1] State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing
来源：
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2024年 / 34卷 / 03期
关键词：
electrochemical metallurgy; hydrometallurgy; leaching; metal recovery; secondary resources;
D O I：
10.11817/j.ysxb.1004.0609.2023-44409
中图分类号：
学科分类号：
摘要：
Metal is an important basic raw material supporting sustainable development of the national economy. However, with the rapid increase of demand for metal mineral resources, high-grade primary metal mineral resources are increasingly depleted. At the same time, during metal resources mining, metallurgy and product utilization, a large number of complex metal wastes will be produced, and improper treatment will easily cause serious environmental pollution. In addition, metal waste (electroplating sludge, anode mud, non-ferrous metallurgical slag, electronic waste, waste lithium ion batteries, etc.) are often rich in Au, Ag, Ni, Mo, Co, Cu, Zn, Cr and other valuable metals, and also are valuable secondary metal resource. Taking secondary resources as the object, this paper analyzes and introduces the element composition, high value and harmfulness of typical secondary metal resources. The research progress of the whole process of wet recovery of secondary metal resources is systematically reviewed from three aspects: leaching of secondary metal resources, metal enrichment and separation in leaching solution and metal extraction. © 2024 Central South University of Technology. All rights reserved.
引用
收藏
页码：855 / 876
页数：21
相关论文
共 108 条
  • [1] MOYA D, ALDAS C, LOPEZ G, Et al., Municipal solid waste as a valuable renewable energy resource: A worldwide opportunity of energy recovery by using waste-to-energy technologies[J], Energy Procedia, 134, (2017)
  • [2] KAYA M., Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes[J], Waste Management, 57, (2016)
  • [3] LIU W, JIANG S Q, JIAO F, Et al., Research progress on resource-oriented treatment technologies for electroplating sludge[J], Electroplating & Finishing, 41, 8, (2022)
  • [4] QIU F Q., Discussion on the current situation and process optimization of various metal recovery from copper anode slime in a factory, Nonferrous Metals Engineering & Research, 44, 2, (2023)
  • [5] CHEN X, DAI W B, CHEN X G, Et al., Research status of resource utilization of nonferrous metallurgical slag, Energy Saving of Nonferrous Metallurgy, 38, 5, (2022)
  • [6] FORTI V, BALDE C P, KUEHR R, Et al., The global e-waste monitor 2020, (2020)
  • [7] BARRAGAN J A, LEON C P, CASTRO J R A, Et al., Copper and antimony recovery from electronic waste by hydrometallurgical and electrochemical techniques[J], ACS Omega, 5, 21, pp. 12355-12363, (2020)
  • [8] LI S, DAI M, WU Y, Et al., Resource utilization of electroplating wastewater: Obstacles and solutions[J], Environmental Science: Water Research & Technology, 8, 3, (2022)
  • [9] HOU Z, LIU T, TAHIR M U, Et al., Facile conversion of nickel-containing electroplating sludge into nickel-based multilevel nano-material for high-performance pseudocapacitors, Applied Surface Science, 538, (2021)
  • [10] KABTAMU D M, WU Y N, CHEN Q, Et al., Facile upcycling of hazardous Cr-containing electroplating sludge into value-added metal − organic frameworks for efficient adsorptive desulfurization, ACS Sustainable Chemistry & Engineering, 8, 33, pp. 12443-12452, (2020)
12345678910