Dynamic characteristics of skyhook semi-active inerter-based vibration isolator

被引:0
|
作者
Tang F. [1 ]
Wang Y. [1 ,2 ]
Ding H. [1 ]
Chen L. [1 ]
机构
[1] School of Mechanics and Engineering Science, Shanghai University, Shanghai
[2] Automotive Engineering Research Institute, Jiangsu University, Zhenjiang
来源
关键词
Dynamic characteristics; Semi-active inerter; Skyhook-inertance control; Vibration isolator;
D O I
10.13465/j.cnki.jvs.2021.15.009
中图分类号
学科分类号
摘要
The 3-element parallel passive inerter-based vibration isolator based on "inerter-spring-damping" can further broaden vibration isolation frequency band of traditional linear isolator, but its high-frequency vibration isolation performance deteriorates significantly. Here, a semi-active inerter-based vibration isolator based on the skyhook-inertance control was proposed to improve its high-frequency vibration isolation performance. The skyhook-inertance control strategy used the absolute-relative acceleration switch control to switch the inertance of the semi-active inerter between its maximum and minimum values, and approximately simulate the mechanical property of the ideal skyhook inerter. Dynamic characteristics of the semi-active inerter-based vibration isolator under base harmonic displacement excitation were studied. The average method was used to solve the approximate analytical solution to the system, and it was verified using the numerical solution. The results showed that compared with the passive inerter-based vibration isolator, the semi-active inerter-based vibration isolator has lower absolute displacement peak value, lower transmissibility peak value and wider vibration isolation frequency band; the latter's high frequency absolute displacement transmissibility drops obviously, it has a significant advantage over the former. © 2021, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码:65 / 72
页数:7
相关论文
共 24 条
  • [1] CARRELLA A, BRENNAN M J, WATERS T P., Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic, Journal of Sound and Vibration, 301, pp. 678-689, (2007)
  • [2] SMITH M C., Synthesis of mechanical networks: the inerter, IEEE Transactions on Automatic Control, 47, 10, pp. 1648-1662, (2002)
  • [3] CHEN Long, YANG Xiaofeng, WANG Ruochen, Et al., Design and performance study of vehicle passive suspension based on two-element inerter-spring-damper structure vibration isolation mechanism, Journal of Vibration and Shock, 32, 6, pp. 95-100, (2013)
  • [4] SUN Xiaoqiang, CHEN Long, WANG Shaohua, Et al., Research on performance benefits in railway vehicle suspension employing inerter, Journal of the China Railway Society, 39, 2, pp. 32-38, (2017)
  • [5] CHEN Wentao, FENG Zhouquan, CHEN Zhengqing, Et al., Performance of track vehicle suspension system based on inerters, Journal of Vibration and Shock, 38, 23, pp. 171-177, (2019)
  • [6] LAZAR I F, NEILD S A, WAGG D J., Using an inerter-based device for structural vibration suppression, Earthquake Engineering and Structural Dynamics, 43, 8, pp. 1129-1147, (2014)
  • [7] CHONG Cholap, KOHJU Ikago, ZHANG Yongshan, Effectiveness of an inerter-spring-damper device in the seismic response control of an isolated structure under extreme earthquakes, Journal of Vibration and Shock, 38, 12, pp. 112-117, (2019)
  • [8] HU Y L, CHEN M Z Q., Performance evaluation for inerter-based dynamic vibration absorbers, International Journal of Mechanical Sciences, 99, pp. 297-307, (2015)
  • [9] CHEN Jie, SUN Weiguang, WU Yangjun, Et al., Minimization of beam response using inerter-based dynamic vibration absorber with negative stiffness, Journal of Vibration and Shock, 39, 8, pp. 15-22, (2020)
  • [10] WANG Yong, WANG Ruochen, MENG Haodong, Dynamic characteristics of an inclined inerter-based vibration isolator with geometrical nonlinearity, Journal of Vibration and Shock, 37, 21, pp. 184-189, (2018)