Parameter Determination and Application Research of Mixed Hardening Model Based on Cyclic Tension-compression Test

被引：2
|
作者：
Li Q. [1 ]
Jin M. [1 ]
Zou Z. [1 ]
Guo J. [1 ]
Yang C. [2 ]
机构：
[1] Key Laboratory of Advanced Forging & Stamping Technology and Science (Yanshan University), Ministry of Education of China, Qinhuangdao
[2] Svolt Energy Technology Company Limited, Baoding
来源：
Jin, Miao (jmiao@ysu.edu.cn) | 1600年 / Chinese Mechanical Engineering Society卷 / 56期
关键词：
Anisotropic; Bauschinger effect; Cyclic tension-compression experiment; Global optimization algorithm; Mixed hardening;
D O I：
10.3901/JME.2020.02.063
中图分类号：
学科分类号：
摘要：
The elastoplastic constitutive model of materials is the most important factor affecting the accuracy of finite element simulation. The mixed hardening constitutive model can accurately represent the real hardening characteristics of the plastic deformation process of materials, and the accuracy of the finite element simulation is directly affected by the accuracy of the material parameters of the mixed hardening constitutive model. Based on Hill48 anisotropy yield criterion, and combined with Voce isotropic hardening model and Armstrong-Frederic nonlinear kinematic hardening model, an elastoplastic constitutive model of mixed hardening considering material anisotropy and Bauschinger effect is established. The cyclic stress-strain curves of DC54D+ZF galvanized sheet are obtained through cyclic tension-compression tests, and the material parameters of the mixed hardening model are accurately determined by the universal global optimization algorithm according to the constitutive equation of mixed hardening under unidirecextional stress state. The applicability of the constitutive model for the problems of cyclic tension-compression of sheet metal and sheet metal passing through drawbead is analyzed by using ABAQUS finite element software, which verifies the reliability and accuracy of the anisotropic mixed hardening constitutive model. Cyclic tension-compression test is an effective method to obtain the material parameters of the constitutive model directly and accurately. © 2020 Journal of Mechanical Engineering.
引用
收藏
页码：63 / 68
页数：5
相关论文
共 18 条
  • [1] Lan F., Wang Y., Chen J., Advances in sheet metal forming simulation of automotive body, Computer Integr Ated Manufacturing Systems, 13, 8, pp. 1586-1596, (2007)
  • [2] Li G., Wang H., Yang X., Et al., Some new topics on process design and mould manufacture for sheet metal forming, Journal of Mechanical Engineering, 46, 10, pp. 31-39, (2010)
  • [3] Peng H., Zhang H., Research development of the contitutive models of metal materials, Materials for Mechanical Engineering, 36, 3, pp. 5-10, (2012)
  • [4] Eggertsen P.A., Mattiasson K., On constitutive modeling for springback analysis, International Journal of Mechanical Sciences, 52, 6, pp. 804-818, (2010)
  • [5] Zang S., Guo C., Zhang K., Investigation on the material constitutive model in sheet metal forming, Journal of Plasticity Engineering, 14, 2, pp. 97-102, (2007)
  • [6] Wang H., Wan M., Yan Y., Et al., Effect of the solving method of parameters on the description ability of the yield criterion about the anisotropic behavior, Journal of Mechanical Engineering, 49, 24, pp. 45-53, (2013)
  • [7] Chen Z., Establishment and application of a kind of yield criterion for sheet forming, (2015)
  • [8] Ziegler H., A modification of Prager's hardening rule, Quarterly of Applied Mathematics, 17, pp. 55-65, (1959)
  • [9] Armstrong P.J., Frederick C.O., A mathematical representation of the multiaxial Bauschinger effects, (1966)
  • [10] Chun B.K., Jinn J.T., Lee J.K., Modeling the Bausch-inger effect for sheet metals, part I: theory, Interna-tional Journal of Plasticity, 18, 5, pp. 571-595, (2002)
12