System Design and Breaking Characteristics Research of Self-triggered Low Voltage Hybrid DC Circuit Breaker

被引：0

作者：

Zhang Z. ^{[1
]}

Gao C. ^{[1
]}

Wang Q. ^{[2
]}

Chen S. ^{[3
]}

Ge S. ^{[4
]}

Li X. ^{[1
]}

机构：

[1] State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Shaanxi Province, Xi’an

[2] School of Sciences, Xi’an University of Technology, Shaanxi Province, Xi’an

[3] School of Electrical Engineering, Xi’an University of Technology, Shaanxi Province, Xi’an

[4] Zhejiang Tengen Electrics Co., Ltd., Zhejiang Province, Wenzhou

来源：

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2024年 / 44卷 / 11期

基金：

中国国家自然科学基金;

关键词：

circuit breaker life; hybrid circuit breaker; little current breaking; low voltage DC system; short circuit breaking;

D O I：

10.13334/j.0258-8013.pcsee.230085

中图分类号：

学科分类号：

摘要：

The low voltage hybrid DC circuit breaker has the advantages of low power consumption, high breaking performance and selective protection, which can better meet the new development needs of photovoltaic, energy storage systems and zero carbon buildings. In this paper, a self-triggered low-voltage DC hybrid switch topology is proposed. First, through the analysis of the working principle of the hybrid circuit breaker, the electromechanical-coupling design method based on arc power supply and drive is proposed. This method uses the arc energy to supply energy to the electronic circuit, and uses the arc voltage as the control signal for the conduction of the converter branch to realize the automatic triggering of the system under short circuit fault. And the theoretical basis for the design of core functional modules is described. On this basis, a low voltage hybrid circuit breaker prototype is developed and the feasibility of the scheme is demonstrated. Finally, the influence rules of different factors on the breaking characteristics are compared and analyzed. Experiments show that compared with the traditional mechanical switch, the little current breaking time is reduced by 85.4%, and the arc energy is reduced by 94.1%, which improves the service life of the circuit breaker, and can successfully break 1.1 kA short-circuit current. It is pointed out that the overall response time of the system is positively related to the voltage rise rate at the initial stage of arcing. The increase of arc conductance and branch parasitic inductance will extend the commutation time. The arc reignition probability is mainly affected by the external system parameters. It may provide basis for the optimization design and performance improvement of low-voltage DC hybrid circuit breakers. ©2024 Chin.Soc.for Elec.Eng.

引用

页码：4544 / 4555

页数：11

共 25 条

[1] GB/T 35727 — 2017 Guideline for standard voltages of medium and low voltage DC distribution system[S]
[2] TSUSAKA A, HASEGAWA K, MATSUMURA T, A study on estimation of arc parameters for low voltage DC arc breaking process[C], Proceedings of 3rd IEEE Third International Conference on DC Microgrids (ICDCM), pp. 1-6, (2019)
[3] LIU Jian, RAVI L, DONG Dong, High power density design of power electronic interrupter in hybrid DC circuit breaker[C], Proceedings of 2021 IEEE Applied Power Electronics Conference and Exposition, (2021)
[4] Qunhai HUO, XIONG Jiawang, ZHANG Ningyu, Review of DC circuit breaker application[J], Electric Power Systems Research, 2022, 209
[5] LI Xuelin, JIANG Guping, SHI Xiaorong, Designand research on improving short-circuit breaking capacity of DC MCCB[J], Electrical & Energy Management Technology, 2021, 7, pp. 45-50
[6] LI Min, DAI Ancai, ZHANG Peifu, Application and structure design of DC MCB[J], Electrical & Energy Management Technology, 2021, 5, pp. 25-29
[7] SHEA J J．, The influence of arc chamber wall material on arc gap dielectric recovery voltage[C], Proceedings of the Electrical Contacts - 2000．Proceedings of the Forty-Sixth IEEE Holm Conference on Electrical Contacts, pp. 161-168, (2000)
[8] CHUNG H B, LEE K H, PARK W J, Arc extinction structure of air circuit breaker for improvement of direct current breaking performance[C], Proceedings of the 6th International Conference on Electric Power Equipment-Switching Technology(ICEPE-ST), (2022)
[9] KONG Xiangbin, JIAO Caidong, ZHAO Liang, Test and analysis of critical load current of DC circuit breaker under different time constant[J], Electrical & Energy Management Technology, 22, pp. 77-81, (2018)
[10] ZHU Tong, YU Zhanqing, ZENG Rong, Application of all-solid-state circuit breaker in low-voltage DC distribution system[J], Southern Power System Technology, 10, 4, pp. 50-56, (2016)

← 1 2 3 →