Design of air-bearing simulator for free-flying robot

被引：1
|
作者：
Xu C. [1 ,2 ]
Li D.-W. [1 ]
He S. [1 ]
Xia M.-Y. [1 ]
Xu Z.-B. [1 ]
Zhao Z.-Y. [1 ,2 ]
机构：
[1] Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Science, Changchun
[2] University of Chinese Academy of Sciences, Beijing
来源：
Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2019年 / 27卷 / 02期
关键词：
Cold gas propulsion; Force distribution; Simulator; Space robots; Structural design; Three degree of freedom;
D O I：
10.3788/OPE.20192702.0352
中图分类号：
学科分类号：
摘要：
To build a ground simulation experiment system for an in-orbit assembly, based on cold gas propulsion, we design a three-degrees-of-freedom free-flying robot simulator, and analyze the structural design, gas path system, dynamic modeling, and control system of the simulator. First, we adopt a modular design to partition the main structure of the simulator for different functions. Second, according to the working principle, we analyze and verify the bearing capacity of the simulator through an experiment. Subsequently, we arrange the nozzle in a partially decoupled way with the entire air path system, which is further designed. Then, we analyze the factors that influence the thrust size of the nozzle theoretically and verify them experimentally. Finally, we use the Newton-Euler method to establish the dynamic equation of the simulator. Simultaneously, combined with Simulink and Adams, we build a control simulation model and perform a motion simulation. The experimental results show that the simulator can carry a weight of more than 800 kg, with a force of 8 N on a single side and an overall running time of 30 min. Through simulation, we observe that the simulator has a good tracking effect on the reference input. The designed simulator can provide a mobile carrier for ground experiments of a super-redundant modular manipulator. © 2019, Science Press. All right reserved.
引用
收藏
页码：352 / 362
页数：10
相关论文
共 18 条
  • [1] Jewison C.M., Reconfigurable Thruster Selection Algorithms for Aggregative Spacecraft Systems, (2014)
  • [2] Liu S.T., Hu R., Zhou P., Et al., Topologic optimization for configuration design of web-skin-type ground structure based large-aperture space mirror, Opt. Precision Eng., 21, 7, pp. 1803-1810, (2013)
  • [3] Jin G., Zhang L., Hu F.S., Investigation on space optical system of high F number and high resolution, Opt. Precision Eng., 15, 2, pp. 155-159, (2007)
  • [4] Zhou C., Research on Modeling and Simulation Analysis for Large Telescope System, (2011)
  • [5] Gardner J.P., Mather J.C., Clampin M., Et al., The james webb space telescope, Space Science Reviews, 123, 4, pp. 485-606, (2006)
  • [6] Miller D., Saenz-Otero A., Wertz J., Et al., SPHERES: a testbed for long duration satellite formation flying in micro-gravity conditions, Proceedings of the AAS/AIAA Space Flight Mechanics Meeting, pp. 167-179, (2000)
  • [7] Mohan S., Sakamoto H., Miller D.W., Formation control and reconfiguration through synthetic imaging formation flying testbed (SIFFT), UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts Ⅲ, (2007)
  • [8] Machairas K., Andreou S., Paraskevas I., Et al., Extending the NTUA space robot emulator for validating complex on-orbit servicing tasks, 12th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA), (2013)
  • [9] Underwood C., Pellegrino S., Lappas V.J., Et al., Using CubeSat/micro-satellite technology to demonstrate the Autonomous Assembly of a Reconfigurable Space Telescope (AAReST), Acta Astronautica, 114, pp. 112-122, (2015)
  • [10] Liu J., Gao Q., Liu Z., Et al., Attitude control for astronautassisted robot in the space station, International Journal of Control Automation & Systems, 14, 4, pp. 1082-1095, (2016)
12