Modeling of high speed and high precision milling forces based on kinematics: Comprehensive modeling and experimental

被引：0
|
作者：
Li G. [1 ,2 ]
Zhang Y. [1 ,2 ]
Li S. [3 ]
Zhu K. [1 ,2 ]
机构：
[1] Changzhou Institute of Advanced Manufacturing Technology, Changzhou
[2] Advanced Manufacturing Technology Center, Institute of Intelligent Machinery, Hefei Institutes of Physical Science, Chinese Academy of Science, Changzhou
[3] School of Machinery and Automation, Wuhan University of Science and Technology, Wuhan
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2023年 / 44卷 / 08期
关键词：
comprehensive model; elastic deformation; kinematics; tool run-out; tool wear;
D O I：
10.7527/S1000-6893.2022.27261
中图分类号：
学科分类号：
摘要：
The milling force is one of the most important process parameters in high speed and high precision milling process. Accurate feedback of milling force information is very important to ensure the stability and precision of milling process. However，there are many factors that affect the milling force，and there is currently a lack of a comprehen⁃ sive milling force model that considers multiple factors. Therefore，this paper focuses on research and comprehen⁃ sively considers the influence of tool wear，tool run-out，and tool elastic deformation on the instantaneous undeformed cutting thickness. Furthermore，the relationship between elastic deformation and variety of entry and exit angles for each engaged flute is analyzed，and the instantaneous cutting thickness model is improved. Based on the kinematic analysis，the position of cutting edge is unified with the shape of premachined workpiece，and a comprehensive model of high speed milling force is established. To verify the accuracy and generality of the proposed model，a series of mill⁃ ing experiments under different parameters are carried out. The experimental results show that the predicted value of milling force is in good agreement with the experimental value，and the error value of milling force is less than 1%. By analyzing the relationship between tool wear per tooth and milling force，it is concluded that the milling force in the feed direction has the greatest impact on the tool wear. Therefore，the radial force component can well characterize the tool wear，so as to improve the milling accuracy and efficiency. © 2023 AAAS Press of Chinese Society of Aeronautics and Astronautics. All rights reserved.
引用
收藏
相关论文
共 38 条
  • [1] PURI A B，, MAITY A, Et al., Determin⁃ ing cutting force coefficients from instantaneous cutting forces in ball end milling［J］, International Journal of Ma⁃ chining and Machinability of Materials, 18, 5, (2016)
  • [2] YOON H S, EHMANN K F., Dynamics and stability of micro-cutting operations［J］, International Journal of Me⁃ chanical Sciences, 115-116, pp. 81-92, (2016)
  • [3] Real-time tool wear monitoring in milling using a cutting condi⁃ tion independent method［J］, International Journal of Ma⁃ chine Tools and Manufacture, 89, pp. 1-13, (2015)
  • [4] ZHAO Z M, YUE C X，, Et al., Time-varying analytical model of ball-end milling tool wear in surface milling［J］, The International Journal of Advanced Manu⁃ facturing Technology, 108, 4, pp. 1109-1123, (2020)
  • [5] CHEN W Q, TENG X Y，, Et al., Surface gen⁃ eration modelling for micro end milling considering the minimum chip thickness and tool runout［J］, Procedia CIRP, 58, pp. 364-369, (2017)
  • [6] DAVIM J P., Modern mechanical engineering：Research，development and education［M］, pp. 115-120, (2014)
  • [7] ZHU K P, ZHANG Y., Modeling of the instantaneous milling force per tooth with tool run-out effect in high speed ball-end milling［J］, International Journal of Ma⁃ chine Tools and Manufacture, 118-119, pp. 37-48, (2017)
  • [8] WU B., Development of a hybrid cutting force model for micro milling of brass［J］, International Journal of Mechanical Sciences, 115-116, pp. 586-595, (2016)
  • [9] SINGH K K, KARTIK V, SINGH R., Stability modeling with dynamic run-out in high speed micromilling of Ti<sub>6</sub>Al<sub>4</sub>V［J］, International Journal of Mechanical Sci⁃ ences, 150, pp. 677-690, (2019)
  • [10] SEGAL J., Modelling and simulation of micro-milling cutting forces［J］, Journal of Materials Processing Technology, 210, 15, pp. 2154-2162, (2010)
1234