Single photon point cloud denoising algorithm based on multi-features adaptive

被引：0
|
作者：
Zhang S. [1 ,2 ]
Li G. [2 ]
Zhou X. [2 ]
Yao J. [2 ,3 ]
Guo J. [2 ]
Tang X. [1 ,2 ]
机构：
[1] College of Mapping and Geographics, Lanzhou Jiaotong University, Lanzhou
[2] Land Satellite Remote Sensing Application Center, Ministry of Natural Resources of P. R. China, Beijing
[3] College of Geodesy Geomatics, Shandong University of Science and Technology, Qingdao
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2022年 / 51卷 / 06期
关键词：
adaptive filtering; ALT03/ATL08; ICESat-2; satellite laser altimetry; single photon laser;
D O I：
10.3788/IRLA20210949
中图分类号：
学科分类号：
摘要：
The new spaceborne photon counting radar can acquire high-precision three-dimensional information of ground and ground targets, but its measurement accuracy is greatly affected by noise. Aiming at the difficulty of signal extraction of single-photon laser data in areas with inconsistent background noise and large slope area, this paper proposed a single photon point cloud denoising algorithm based on multi-feature adaptive. It was different from the traditional circular or elliptical filtering kernel, and used the parallelogram filtering kernel which was more in line with the characteristics of single photon point cloud data, and signals were adaptively identified by slope, spatial density and noise rate. The ICESat-2 single photon point cloud data located in the glacier area of Qinghai-Tibet Plateau was selected to carry out the point cloud denoising test and verification, and the study area had a large slope and broken terrain. Compared with the official denoising results of ATL03 and ATL08, the proposed algorithm has better performance in areas with inconsistent background noise level and large slope area. © 2022 Chinese Society of Astronautics. All rights reserved.
引用
收藏
相关论文
共 20 条
  • [1] Tang X M, Li G Y., Development and prospect of laser altimetry satellite, Space International, 11, pp. 13-18, (2017)
  • [2] Seidleck M., The ice, cloud, and land elevation satellite-2 —Overview, science, and applications, 2018 IEEE Aerospace Conference, pp. 1-8, (2018)
  • [3] Tang X M, Li G Y., Thoughts about land and sea satellite laser altimetry, Aerospace Shanghai, 36, 3, pp. 15-19, (2019)
  • [4] Mcgill M, Markus T, Scott V S, Et al., The Multiple Altimeter Beam Experimental Lidar (MABEL): An airborne simulator for theICESat-2 mission, Journal of Atmospheric & Oceanic Technology, 30, 2, pp. 345-352, (2013)
  • [5] Magruder L A, Wharton M E, Stout K D, Et al., Noise filtering techniques for photon-counting LADAR data, Proceedings of SPIE, 8379, (2012)
  • [6] Neumann T A, Brenner A, Hancock D, Et al., ATLAS/ICESat-2 L2A global geolocated photon data, version 3, NASA National Snow and Ice Data Center Distributed Active Archive Center, Boulder, CO, USA
  • [7] Gwenzi D, Lefsky M A, Suchdeo V P, Et al., Prospects of the ICESat-2 laser altimetry mission for savanna ecosystem structural studies based on airborne simulation data, ISPRS Journal of Photogrammetry & Remote Sensing, 118, pp. 68-82, (2016)
  • [8] Neuenschwander A L, Pitts K L, Jelley B P, Et al., ATLAS/ ICESat-2 L3 A land and vegetation height, version 3, NASA National Snow and Ice, Boulder, CO, USA
  • [9] Xu Y T, Li G Y, Qiu C X, Et al., Single photon laser data processing technology based on Terrain Correlation and least square curve fitting, Infrared and Laser Engineering, 48, 12, (2019)
  • [10] Cao B C, Fang Y, Jiang Z Z, Et al., Single photon laser point cloud denoising algorithm based on adaptive spatial density, Geomatics Sciecce and Engineering, 39, 4, pp. 13-17, (2019)
12