Report on the AFRIMETS.M.T-S1 supplementary torque comparison for 500 N·m and 1000 N·m between NIS (Egypt) and PTB (Germany)

被引：0

作者：

Khaled K.M. ^{[1
]}

Brüge A. ^{[2
]}

Kumme R. ^{[2
]}

机构：

[1] National Institute of Standards (NIS), Tersa Street, El Haram, P.O. Box: 136 Giza, Giza

[2] Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, Braunschweig

来源：

Metrologia | 2023年 / 60卷 / 1 A期

关键词：

Uncertainty analysis;

D O I：

10.1088/0026-1394/60/1A/07004

中图分类号：

学科分类号：

摘要：

Main text The AFRIMETS.M.T-S1 supplementary comparison has been conducted between NIS (Egypt) and PTB (Germany) at the torque of 500 N·m and 1000 N·m in both clockwise and anticlockwise directions. The comparison results revealed the equivalence of torque realized by the 1000 N·m DWTSMs of NIS and of PTB within their measurement uncertainties. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA). © 2023 BIPM & IOP Publishing Ltd.

引用

共 50 条

[1] Final Report on the APMPMT-S1 Supplementary Comparison Measurand Torque: 0 N•m, 1000 N•m, 2000 N•m (bilateral comparison).
Ogushi, Koji
Nishino, Atsuhiro
Nurcahyono, Dinar
Hafid
METROLOGIA, 2016, 53
[2] Final report on the torque key comparison CCM.T-K1.1: Measurand torque: 0 N m, 500 N m, 1000 N m
Roeske, Dirk
METROLOGIA, 2010, 47
[3] Torque Key Comparison CCM.T-K1.3. Measurand Torque: 0 N m, 500 N m, 1000 N m
Kim, Min-Seok
Khaled, K. M.
METROLOGIA, 2015, 52
[4] Final Report on the Torque Comparison EURAMETMT-S1 Measurand Torque: 1 N.m, 5 N.m, 10 N.m, 50 N.m, 200 N.m, 500 N.m, and 1000 N.m
Roeske, Dirk
METROLOGIA, 2010, 47
[5] Final report on the torque supplementary comparison COOMETMT-S1 measurand torque: 0 N.m, 100 N.m, 500 kN.m, 1500 N.m, 2500 N.m
Cherepanov, Boris
Roeske, Dirk
METROLOGIA, 2017, 54
[6] Torque key comparison CCM.T-K1.3: Measurand torque: 0 N m, 500 N m, 1000 N m: Final report: March 9, 2015
Kim, Min-Seok
Khaled, K.M.
Metrologia, 2015, 52 (1A)
[7] Final report on the torque key komparison CCM.T-K1.2 measurand torque: 0 N.m, 500 N.m, 1000 N.m
Roeske, Dirk
METROLOGIA, 2015, 52
[8] Metrological characterization of a 1 N m torque standard machine at PTB, Germany
Roeske, D.
METROLOGIA, 2014, 51 (01) : 87 - 96
[9] Final report on the torque comparison EURAMETMT-S2, measurand torque: 10 N.m, 20 N.m, 40 N.m, 60 N.m, 80 N.m, and 100 N.m
Roeske, Dirk
METROLOGIA, 2017, 54
[10] Report on the AFRIMETS.M. F-S1 supplementary force comparison for 10 kN and 100 kN
Bangi J.O.
Seidel M.
Kimetto D.
Kumme R.
Rotich H.
Roske D.
Metrologia, 2022, 59 (1 A)

← 1 2 3 4 5 →