Linear expansion and durability of a composite boards (Mdf laminated using three selected wood veneers) against drywood termites

被引：0

作者：

Cahyono T.D. ^{[1
]}

Yanti H. ^{[2
]}

Anisah L.N. ^{[3
]}

Massijaya M.Y. ^{[4
]}

Iswanto A.H. ^{[5
]}

机构：

[1] Faculty of Agriculture and Forestry, University of Darussalam Ambon, Jl. Raya Waehakila Puncak Wara, Sirimau, 97128, Ambon

[2] Faculty of Forestry, Tanjungpura University, Jl. Prof. Hadari Nawawi, Pontianak

[3] Indonesian Ministry of Environment and Forestry, Manggala Wanabakti Building, Jl. Jend. Gatot Subroto, Jakarta

[4] Department of Forest Product, Faculty of Forestry, IPB University, Jl. Raya Dramaga,, Bogor

[5] Department of Forest Product, Faculty of Forestry, Universitas Sumatera Utara, Medan, 20155, Padang Bulan

来源：

Journal of the Korean Wood Science and Technology | 2020年 / 48卷 / 06期

关键词：

Com-ply; Linear expansion; MDF; Resistance; Veneer;

D O I：

10.5658/WOOD.2020.48.6.907

中图分类号：

学科分类号：

摘要：

This research was conducted to investigate the linear expansion and resistance properties of a composite board (com-ply). This board was made of medium-density fiberboard (MDF) laminated using avocado (Persea americana), mahogany (Swietenia mahogani), and pine (Pinus merkusii) veneers. These three types of veneers were laminated on both surfaces of the MDF using adhesives, namely, epoxy and isocyanate. Glue (250 g･m−2) was spread on the surface, followed by cold press for 3 h with an applied pressure of 15 kg･cm−2. The research result revealed that com-ply exhibited an increased dimensional stability compared with MDF, indicated by reduction in water absorption, thickness swelling, and linear expansion. The com-ply made of the pine veneer and isocyanate adhesive exhibited high density, water absorption, thickness swelling, and screw withdrawal load. The com-ply that exhibited the strongest resistance to drywood termite attacks was the one made of the mahogany veneer and isocyanate adhesive. Moreover, the com-ply that exhibited the biggest weight loss (3.6 %) was made of the pine veneer and epoxy adhesive. The results of this research may facilitate in manufacturing com-ply using the selected veneer and adhesive without the application of hot press. © 2020, Korean Society of Wood Science Technology. All rights reserved.

引用

页码：907 / 916

页数：9