Thermal control design and simulation of micro star sensor

被引：0

作者：

Lv J. ^{[1
]}

Wang L. ^{[1
]}

Su S. ^{[2
]}

Song X. ^{[2
]}

Liu X. ^{[1
]}

Song B. ^{[3
]}

机构：

[1] China Academy of Launch Vehicle Technology, Beijing

[2] Beijing Institute of Spacecraft System Engineering, Beijing

[3] Capital Aerospace Machinery Corporation Limited, Beijing

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2022年 / 51卷 / 11期

关键词：

micro star sensor; thermal analysis; thermal control design;

D O I：

10.3788/IRLA20220116

中图分类号：

学科分类号：

摘要：

In order to ensure the normal operation of the star sensor during the on-orbit mission of the application platform, it needs to be thermally designed. First, a process of thermal analysis and optimization was proposed, which combined with the conditions of the external heat flow, installation layout and working mode of the micro star sensor assembly. In the process of thermal analysis optimization, the influence of various factors, such as optical, mechanical and thermal, was considered. Second, a thermal control scheme of the micro star sensor assembly was designed. The thermal control scheme proposed a design idea of using active electric heating and homogenizing the temperature between the light-shield and the star sensor body, which solved the problems of complex space thermal environment, higher temperature control requirements, and heat dissipation path limited by a installation structure during the on-orbit period of the micro star sensor module. This scheme ensured the effective and reliable work of the micro star sensor assembly. Third, an I-DEAS/TMG finite element mode was established. The thermal control simulation of the micro star sensor assembly under high and low temperature conditions was carried out, and the simulation results of the temperature distribution and uniformity of the star sensor assembly were analyzed. Finally, a ground test was carried out to ensure the correctness of the thermal control scheme, and the test results met the thermal requirement of the star sensor assembly. This paper can provide a reference for the following thermal design of micro star sensor assembly of on-orbit platforms. © 2022 Chinese Society of Astronautics. All rights reserved.

引用

共 9 条

[1] Zhu Junqing, Sha Wei, Fang Chao, Et al., Parametric modeling aided design for star sensor lens, Chinese Optics, 14, 3, pp. 615-624, (2021)
[2] Zhang Hui, Zhou Xiangdong, Wang Xinmei, Et al., Survey of technology status and development of all-time star sensors in near-earth space, Acta Aeronautica et Astronautica Sinica, 41, 8, (2020)
[3] Min G R, Guo S., Thermal Control of Spacecraft, (1998)
[4] Liu Haibo, Tan Jichun, Hao Yuncai, Et al., Effect of ambient temperature on star sensor measurement accuracy, OptoElectronic Engineering, 35, 12, pp. 40-44, (2008)
[5] Yu Chengwu, Sui Jie, Chen Chao, Et al., Thermal design and verification of multi-head very high accuracy star sensor onboard GF-7 satellite, Spacecraft Engineering, 29, 3, pp. 144-150, (2022)
[6] Jiang Fan, Wang Zhongsu, Chen Liheng, Et al., Thermal design of star sensor assembly, Infrared and Laser Engineering, 43, 11, pp. 3740-3745, (2014)
[7] Jiang Fan, Wu Qingwen, Liu Ju, Et al., Thermal design of lightweight space remote sensor integrated with satellite in low earth orbit, Chinese Optics, 6, 2, pp. 237-243, (2013)
[8] Sun Peng, Zhao Xin, Liu Wei, Et al., Temperature control method and test verification for integrated star sensor, Spacecraft Engineering, 27, 2, pp. 119-123, (2018)
[9] Wang Zhen, Wei Xinguo, Zhang Guangjun, Structure optimization for multi -FOV star sensors, Infrared and Laser Engineering, 40, 12, pp. 2469-2473, (2011)

← 1 →