Coupling characteristics of low Reynolds number pulsating flow and flexible wall in triangular channel

被引:0
|
作者
Huang Q. [1 ,2 ]
Zhang X. [1 ]
Mi X. [1 ]
Zhou K. [1 ]
Zhong Y. [2 ]
机构
[1] Zhejiang Cosin CSP Technology Research Institute Co., Ltd., Huzhou
[2] Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou
来源
Huagong Xuebao/CIESC Journal | 2022年 / 73卷 / 05期
关键词
Drag reduction; Flexible wall; Flow; Heat transfer; Pulsating flow;
D O I
10.11949/0438-1157.20211540
中图分类号
学科分类号
摘要
Using water as the working fluid, the coupling characteristics of low Reynolds number pulsating flow and flexible wall in triangular channel were experimentally studied. Experiments of heat transfer and flow resistance were carried out in detail under the impacts of Womersley number (W), pulsating amplitude (A) and rigidity (Kb). Moreover, the dynamic response relation between flexible wall and pulsating flow was investigated to illuminate the effects of flexible wall deformation and vibration frequency on heat transfer and flow resistance. The results indicate that the dual effects of heat transfer enhancement and drag reduction are achieved by pulsating flow in the triangular channel with flexible wall, but heat transfer efficiency increasing by 0-50% is relatively weak. Besides, the reason why flow resistance and enhanced heat transfer efficiency decease is that deformed flexible wall results in increasing the cross-sectional area of the flexible wall (the fluid velocity decreases), and the pulsation energy is weakened with the increase of W and A. Furthermore, the reduction of enhanced heat transfer effect cased by flexible wall vibration and deformation gradually tends to be dominant with the increase of W. The reduction of flow resistance is mainly caused by the deformation of the flexible wall, and the flexible wall vibration frequency has less effect on the energy dissipation of pulsating flow. © 2022, Editorial Board of CIESC Journal. All right reserved.
引用
收藏
页码:1964 / 1973
页数:9
相关论文
共 31 条
  • [1] Ye Q H, Zhang Y H, Wei J J., A comprehensive review of pulsating flow on heat transfer enhancement, Applied Thermal Engineering, 196, (2021)
  • [2] Jin D X, Lee Y P, Lee D Y., Effects of the pulsating flow agitation on the heat transfer in a triangular grooved channel, International Journal of Heat and Mass Transfer, 50, 15, pp. 3062-3071, (2007)
  • [3] Huang Q, Wang X T, Yang Z C, Et al., Influence of vortex on heat transfer enhancement in trigngular grooved channel by pulsating flow, CIESC Journal, 67, 9, pp. 3616-3624, (2016)
  • [4] Su Y H, Huang Q, Xia C W, Et al., Correlation analysis on heat transfer and secondary flow by pulsating flow at low-Reynolds number, Chemical Engineering (China), 46, 3, pp. 21-25, (2018)
  • [5] Yu J Y, Lin W, Zheng X T., Effect on the flow and heat transfer characteristics for sinusoidal pulsating laminar flow in a heated square cylinder, Heat and Mass Transfer, 50, 6, pp. 849-864, (2014)
  • [6] Xu S L, Yang L L, Li Y, Et al., Experimental and numerical investigation of heat transfer for two-layered microchannel heat sink with non-uniform heat flux conditions, Heat and Mass Transfer, 52, 9, pp. 1755-1763, (2016)
  • [7] Sundstrom L R J, Cervantes M J., Characteristics of the wall shear stress in pulsating wall-bounded turbulent flows, Experimental Thermal and Fluid Science, 96, pp. 257-265, (2018)
  • [8] Zohir A E, Abdel Aziz A A, Habib M A., Heat transfer characteristics and pressure drop of the concentric tube equipped with coiled wires for pulsating turbulent flow, Experimental Thermal and Fluid Science, 65, pp. 41-51, (2015)
  • [9] Zhang C., Research on resistance and the transition characteristics of pulsating flow in narrow channels, (2013)
  • [10] Angnes N T T, Perumal K, Agus S., Review on drag reducing polymers, Korean J. Chem. Eng, 32, 8, pp. 1455-1476, (2015)