Performance of U-tube solar collector with phase change materials

被引:0
|
作者
Hu W. [1 ]
Zhang S. [2 ]
Zhang C. [1 ]
Xiong C. [1 ]
Sun P. [1 ]
机构
[1] School of Energy and Environmental Engineering, Hebei University of Engineering, Handan
[2] The Hong Kong Polytechnic University, Hongkong
关键词
Collector; Phase change; Solar energy; Test; Thermal performance;
D O I
10.16085/j.issn.1000-6613.2020-0732
中图分类号
学科分类号
摘要
This study combined U-tube solar collector and phase change materials (paraffin wax) to fabricate an experimental platform for comparative investigation on water production and heat storage performance. The experimental results represent that the application of paraffin wax could effectively increase water production by 462g and working duration by 0.5h. At given test conditions, the thermal efficiency of U-tube solar collectors integrated with paraffin wax could reach approximately 54.6% and 28.51% in summer and transition season, respectively. In addition, the enhancement ratio of useful heat decreases from 38.26% to 14.66% in summer and 38.67% to 13.85% in transition season with an increase in the flow rate of the working medium. The findings suggest that the flow rate should be considered to optimize the application of U-tube solar collector integrated with paraffin wax in a practical project. © 2021, Chemical Industry Press Co., Ltd. All right reserved.
引用
收藏
页码:771 / 777
页数:6
相关论文
共 16 条
  • [1] XUE H., Study on phase change heat transfer in solar vacuum tube collector with energy storage, (2015)
  • [2] LIU Y F, ZHANG X L, HUA W S, Et al., Numerical analysis of heat charge and discharge characteristics of solar collectors integrated with phase change thermal storage, Acta Energiae Solaris Sinica, 38, 9, pp. 2486-2492, (2017)
  • [3] QU S L, PENG L, WU X Q, Et al., Design of phase change thermal storage device in the thermal utilization of solar energy, Acta Energiae Solaris Sinica, 36, 7, pp. 1705-1709, (2015)
  • [4] POOLE M R, SHAH S B, BOYETTE M D, Et al., Performance of a coupled transpired solar collector-phase change material-based thermal energy storage system, Energy and Buildings, 161, pp. 72-79, (2018)
  • [5] CHOPRA K, PATHAK A K, TYAGI V V, Et al., Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: an experimental assessment, Energy Conversion and Management, 203, (2020)
  • [6] SU P F, WU W, GAO X N, Et al., Performance study of solar energy storage/evaporator/collector, Journal of Nanjing Normal University (Natural Science Edition), 16, 1, pp. 53-60, (2016)
  • [7] WANGZ Y, DIAO Y H, ZHAO Y H, Et al., Experimental study on thermal characteristics of an integrated solar air collector-storage based on flat micro-heat pipe arrays, Journal of Engineering Thermophysics, 38, 3, pp. 625-634, (2017)
  • [8] ABIKERSH M H, EL-MORSI M, ABDELRAHMAN W, Et al., On-demand operation of a compact solar water heater based on U-pipe evacuated tube solar collector combined with phase change material, Solar Energy, 155, pp. 1130-1147, (2017)
  • [9] FAEGH M, SHAFII M B., Experimental investigation of a solar still equipped with an external heat storage system using phase change materials and heat pipes, Desalination, 409, pp. 128-135, (2017)
  • [10] KOLIOAK Y, RADHAKRISHNA M, PRASAD A M K., Optimization of heat energy based on phase change materials used in solar collector using Taguchi method, Materials Today: Proceedings, 22, 4, pp. 2404-2011, (2020)