Chloride transport behavior in cementitious-based materials under cyclic drying-wetting condition without influence of carbonation

被引:0
|
作者
Chang H. [1 ]
Jin Z. [2 ]
机构
[1] School of Qilu Transportation, Shandong University, Jinan
[2] School of Civil Engineering, Qingdao University of Technology, Qingdao
关键词
Cementitious-based materials; Chloride; Concentration peak; Cyclic drying-wetting; Model; N[!sub]2[!/sub] environment;
D O I
10.3969/j.issn.1001-0505.2019.06.019
中图分类号
学科分类号
摘要
To ascertain the chloride distribution feature and law in specimens under cyclic drying-wetting conditions to be devoid of carbonation effect, a cyclic drying-wetting experiment was carried out in N2 environment to completely eliminate the influence of carbonation during drying; and a numerical model of chloride transport was established based on diffusion and capillary adsorption-moisture evaporation. The results show that a chloride concentration peak appears both in the experimental and calculated profiles, and the peak chloride content and its location of experimental and calculated results are very close. Moreover, the peaks appear at the depth of 0 to 2 mm. In addition, both the increase of exposure time, water-cement ratio, temperature, and concentration of external salt solution and the decrease of ambient humidity will cause the peak of the chloride concentration to be more significant and the position of the peak to migrate deeper from the exposed surface. The consistence of experimental and calculated results presents the distribution feature and law of chloride in specimens without the impact of carbonation, and verifies the vital role of capillary adsorption-moisture evaporation on the formation of chloride concentration peak. © 2019, Editorial Department of Journal of Southeast University. All right reserved.
引用
收藏
页码:1153 / 1161
页数:8
相关论文
共 34 条
  • [1] Yu Z.W., Chen Y., Liu P., Et al., Accelerated simulation of chloride ingress into concrete under drying-wetting alternation condition chloride environment, Construction and Building Materials, 93, pp. 205-213, (2015)
  • [2] Arya C., Vassie P., Bioubakhsh S., Modelling chloride penetration in concrete subjected to cyclic wetting and drying, Magazine of Concrete Research, 66, 7, pp. 364-376, (2014)
  • [3] Castro P., de Rincon O.T., Pazini E.J., Interpretation of chloride profiles from concrete exposed to tropical marine environments, Cement and Concrete Research, 31, 4, pp. 529-537, (2001)
  • [4] Meira G.R., Andrade C., Padaratz I.J., Et al., Chloride penetration into concrete structures in the marine atmosphere zone-Relationship between deposition of chlorides on the wet candle and chlorides accumulated into concrete, Cement and Concrete Composites, 29, 9, pp. 667-676, (2007)
  • [5] Polder R.B., Peelen W.H.A., Characterisation of chloride transport and reinforcement corrosion in concrete under cyclic wetting and drying by electrical resistivity, Cement and Concrete Composites, 24, 5, pp. 427-435, (2002)
  • [6] Chang H.L., Mu S., Xie D.Q., Et al., Influence of pore structure and moisture distribution on chloride "maximum phenomenon" in surface layer of specimens exposed to cyclic drying-wetting condition, Construction and Building Materials, 131, pp. 16-30, (2017)
  • [7] Chang H.L., Mu S., Feng P., Influence of carbonation on "maximum phenomenon" in surface layer of specimens subjected to cyclic drying-wetting condition, Cement and Concrete Research, 103, pp. 95-109, (2018)
  • [8] Andrade C., Climent M.A., de Vera G., Procedure for calculating the chloride diffusion coefficient and surface concentration from a profile having a maximum beyond the concrete surface, Materials and Structures, 48, 4, pp. 863-869, (2015)
  • [9] Ann K.Y., Ahn J.H., Ryou J.S., The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures, Construction and Building Materials, 23, 1, pp. 239-245, (2009)
  • [10] Andrade C., Diez J.M., Alonso C., Mathematical modeling of a concrete surface "skin effect" on diffusion in chloride contaminated media, Advanced Cement Based Materials, 6, 2, pp. 39-44, (1997)