Economical Speed Test on a 4-Stroke Single-Cylinder Diesel Engine Running on Diesel Mixed with Chicken Waste Oil

被引:0
|
作者
Rao D.B.C. [1 ]
Reddy V.B. [2 ]
Vinay P.V. [3 ]
Krishna M.J.
Surakasi R. [4 ]
机构
[1] Dept. of Mech. Engg, Aditya Inst. of Tech. and Management, Andhra Pradesh, Tekkali
[2] Dept. of Mech. Engg, Raghu Inst. of Tech. (A), Andhra Pradesh, Visakhapatnam
[3] Dept. of Mech. Engg, Gayatri Vidya Parishad College for Degree and PG Courses (A), Andhra Pradesh, Visakhapatnam
[4] Dept. of Mech. Engg, Lendi Inst. of Engg. and Tech, Andhra Pradesh, Vizianagaram
关键词
Blends; Chicken waste oil; Extraction of oil; Pure diesel;
D O I
10.4273/ijvss.15.7.07
中图分类号
学科分类号
摘要
Biodiesel is an option to diesel fuel that is better for the environment. It is made of alkyl esters that come from fatty acids. Biodiesel can be made from vegetable oils that are safe to eat, vegetable oils that are not safe to eat, animal fats, and used food oils. No motor changes are required to utilize biodiesel instead of oil-based diesel. Biodiesel can be blended in with oil-based diesel in any extent. This study focuses on the process of extracting oil from chicken faeces for preparing purposes. The removal of triglycerides is achieved by the transesterification process. The extracted oil properties like density, viscosity calorific value etc. were found in the college laboratory and the oil is used to blend in pure diesel in 5% and 10% by volume. The mixed fuels alongside unadulterated diesel are used to test to anticipate execution and practical speed on a solitary chamber diesel motor. The result shows that the chicken waste oil mix improves the productivity and better conservative speed. © 2023. Carbon Magics Ltd.
引用
收藏
页码:912 / 914
页数:2
相关论文
共 50 条
  • [1] Performance Assessment of a Single-Cylinder Diesel Engine with Diesel and Waste Cooking Oil Blends Preheated by Engine Exhaust Gas
    Shukla A.K.
    Dutta P.P.
    Bardalai M.
    [J]. International Journal of Vehicle Structures and Systems, 2022, 14 (02) : 150 - 157
  • [2] Study on cottonseed oil as a partial substitute for diesel oil in fuel for single-cylinder diesel engine
    He, Y
    Bao, YD
    [J]. RENEWABLE ENERGY, 2005, 30 (05) : 805 - 813
  • [3] Soybean and Rice-Bran Oil blended Biodiesel Production and Performance Test on 4-Stroke Single Cylinder Diesel Engine
    Tripathi, Bhartendu Mani
    Shukla, Shailendra Kumar
    [J]. Journal of Solid Waste Technology and Management, 2024, 50 (03): : 522 - 531
  • [4] An Economical and Precise Cooling Model and Its Application in a Single-Cylinder Diesel Engine
    Xie, Zhifeng
    Wang, Ao
    Liu, Zhuoran
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (15):
  • [5] Modeling and validation of crankshaft speed fluctuations of a single-cylinder four-stroke diesel engine
    Babagiray, Mustafa
    Solmaz, Hamit
    Ipci, Duygu
    Aksoy, Fatih
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2022, 236 (04) : 553 - 568
  • [6] Experimental dynamic analysis of the piston assembly of a running single-cylinder diesel engine
    Cakir, Mehmet
    [J]. JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 2021, 20 (04): : 235 - 242
  • [7] Effective utilisation of waste cooking oil in a single-cylinder diesel engine using alumina nanoparticles
    Roy, Sumit
    Parsi, Pranay Kumar
    Kotha, R. Sreeram
    Barman, Sanmitra
    Vinayak, Kalluri
    Roy, Mili Mitra
    Banerjee, Rahul
    [J]. SUSTAINABLE ENERGY & FUELS, 2020, 4 (02): : 571 - 581
  • [8] Study on noise of rapeseed oil blends in a single-cylinder diesel engine
    Bao, Y. D.
    He, Y.
    [J]. RENEWABLE ENERGY, 2006, 31 (11) : 1789 - 1798
  • [9] Study on rapeseed oil as alternative fuel for a single-cylinder diesel engine
    He, Y
    Bao, YD
    [J]. RENEWABLE ENERGY, 2003, 28 (09) : 1447 - 1453
  • [10] Correlation of single-cylinder to multi-cylinder performance for a medium speed diesel engine
    Topinka, Jennifer A.
    Hibshman, Joell R.
    Glenn, W. Douglas
    [J]. Proceedings of the 2006 Spring Technical Conference of the ASME Internal Combustion Engine Division, 2006, : 257 - 265