Wireless monitoring of AC current using passive magnetic sensor tags: Measurement and calibration

被引:0
|
作者
Lin Q. [1 ]
Wen Y. [1 ]
Shao Z. [1 ]
Li P. [1 ]
机构
[1] School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai
来源
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2023年 / 44卷 / 12期
关键词
Fourier series fitting; particle swarm optimization; passive wireless measurement; sensing model;
D O I
10.19650/j.cnki.cjsi.J2311818
中图分类号
学科分类号
摘要
The sensor tag in this article uses passive wireless sensing technology to transmit data and energy. It uses the built-in sensing module to detect the magnetic field intensity around the cable, realizing cable current measurement without battery maintenance and cable connection. However, due to the limitation of microwatt power supplied by radio frequency waves, the number of sampling points of the sensor tag is restricted, the sampling frequency is low and the nonlinearity of the magnetic field sensitive element makes the mapping relationship between the sensor data and the cable current complicated. Hence, it is difficult to calibrate and measure the sensor tag. To solve this problem, this article proposes an optimization algorithm combining particle swarm optimization and interior point method to extract the characteristic values (frequency and effective value) from the sensing data by Fourier series fitting and calibration. During the measurement, the characteristic values are obtained by Fourier series fitting of sensor data groups. Then, the characteristic values are substituted into the sensor model established during calibration. The constant amplitude current measurement with the frequency of 47 ~ 60 Hz and an effective value of 5 ~ 45 A is realized, and the relative errors of current frequency and effective value are less than 0.4% and 1.9%, respectively. The experimental results show that the measurement system equipped with the sensor tag can not only realize passive wireless measurement of cable current, but also can realize the maximum current fluctuation measurement allowed by domestic power system standards. © 2023 Science Press. All rights reserved.
引用
收藏
页码:270 / 279
页数:9
相关论文
共 29 条
  • [1] CHEN K L., Intelligent contactless current measurement for overhead transmission lines[J], IEEE Transactions on Smart Grid, 13, 4, pp. 3028-3037, (2022)
  • [2] TORZYK B, WI CEK B., Second-harmonic contactless method for measurement of RMS current using a standard infrared camera [J], IEEE Transactions on Instrumentation and Measurement, 70, pp. 1-8, (2021)
  • [3] XU ZH ZH, WEN Y M, SHAO ZH, Et al., Universal-passive UHF radio frequency sensing tags [J], Chinese Journal of Scientific Instrument, 41, 12, pp. 158-165, (2020)
  • [4] CUI S J, WANG X., Solar wireless sensor node energy prediction based on long-short term memory, Chinese Journal of Scientific Instrument, 39, 11, pp. 147-154, (2018)
  • [5] WANG L, ZHAO L, LUO G, Et al., System level design of wireless sensor node powered by piezoelectric vibration energy harvesting [J], Sensors and Actuators, A. Physical, (2020)
  • [6] LU W SH, YOU R, ZHOU Y, Et al., Non-invasive current monitoring microsystem based on a single TMR sensor, Chinese Journal of Scientific Instrument, 41, 6, pp. 1-9, (2020)
  • [7] GEORGE N, RIPKA P., Rectangular busbar with circular sensing part for wideband current measurement[J], IEEE Transactions on Instrumentation and Measurement, 72, pp. 1-8, (2023)
  • [8] LU C C, LIN Y C, TIAN Y Z, Et al., Hybrid microfluxgate and current transformer sensor [J], IEEE Transactions on Magnetics, 58, 8, pp. 1-5, (2022)
  • [9] LI Q, XIONG J F, YANG ZH CH, Et al., Reactive power measuring based on multi-cycle synchronous samplingand wide-band phase-shifting, Electric Power Automation Equipment, 34, 6, pp. 96-100, (2014)
  • [10] WANG W, ZHANG M, YANG Y, Et al., A fiber laser doppler vibrometer based on fringe counting and multiperiod synchronous frequency measurement method[J], Journal of Nanoelectronics & Optoelectronics, 11, 6, pp. 777-782, (2016)