Design method of extractive distillation process based on optimization model

被引：0

作者：

Tian K. ^{[1
]}

Zhang X. ^{[2
]}

Zhang L. ^{[3
]}

机构：

[1] School of Chemical Engineering, Jiuquan Vocational and Technical College, Jiuquan

[2] Department of Chemical and Biological Engineering, Hong Kong University and Science and Technology

[3] School of Chemical Engineering, Dalian University of Technology, Dalian

来源：

Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities | 2021年 / 35卷 / 03期

关键词：

Acetic acid-water; Extractive distillation processes; General algebraic modeling system(GAMS); Generalized disjunctive programming; Rigorous process optimization;

D O I：

10.3969/j.issn.1003-9015.2021.03.021

中图分类号：

学科分类号：

摘要：

A systematic approach based on rigorous process optimization was presented for optimal design of extractive distillation processes. The proper extractants were determined and the vapor-liquid equilibrium was obtained by a thermodynamic model with parameters fitted from the experimental data of extractant. The rigorous optimization of extractive distillation processes was performed by the generalized disjunctive programming (GDP) models on the general algebraic modeling system (GAMS), and the equipment and operation costs were calculated with the economic model of distillation column. The column specifications and operating conditions were simultaneously optimized by taking the lowest annual cost as the objective function. The proposed method was applied to the separation of acetic acid and water. The results show that the proposed method can greatly reduce the energy consumption and production cost compared with the traditional method. © 2021, Editorial Board of "Journal of Chemical Engineering of Chinese Universities". All right reserved.

引用

页码：542 / 551

页数：9

共 14 条

[1] KOSSACK S, KRAEMER K, GANI R, Et al., A systematic synthesis framework for extractive distillation processes, Chemical Engineering Research and Design, 86, 7, pp. 781-792, (2008)
[2] LEK-UTAIWAN P, SUPHANIT B, DOUGLAS P L, Et al., Design of extractive distillation for the separation of close-boiling mixtures: Solvent selection and column optimization, Computers & Chemical Engineering, 35, 6, pp. 1088-1100, (2011)
[3] BARTTFELD M, AGUIRRE POA, GROSSMANN I E., Alternative representations and formulations for the economic optimization of multicomponent distillation columns, Computers & Chemical Engineering, 27, 3, pp. 363-383, (2003)
[4] CABALLERO J A, MILAN-YANEZ D., GROSSMANN I E., Optimal synthesis of distillation columns: Integration of process simulators in a disjunctive programming environment, Computer Aided Chemical Engineering, 20, pp. 715-720, (2005)
[5] ZHIGANG L, CHENGYUE L, YINGXIA L, Et al., Separation of acetic acid and water by complex extractive distillation, Separation and Purification Technology, 36, 2, pp. 131-138, (2004)
[6] HAN S C, YANG J B., Simulation study of the separation of Acetic acid and water by extractive distillation with NMP, Guang Dong Hua Gong, 39, 9, pp. 177-181, (2012)
[7] Common solvents used in organic chemistry
[8] Aspen Plus User Guide, Chapter 7 Guidelines for choosing a property method, (2000)
[9] WITTIG R, LOHMANN J, GMEHLING J., Vapor-liquid equilibria by UNIFAC group contribution. 6. revision and extension, Industrial & Engineering Chemistry Research, 42, 1, pp. 183-188, (2003)
[10] YEOMANS H, GROSSMANN I E., Disjunctive programming models for the optimal design of distillation columns and separation sequences, Industrial & Engineering Chemistry Research, 39, 6, pp. 1637-1648, (2000)

← 1 2 →