Performance of Plugged and Insensitive High-energy Azidonitramine Gun Propellant

被引:0
|
作者
Zhao Q. [1 ]
Liu B. [1 ]
Liu S.-W. [1 ]
Ma F.-S. [1 ]
Wang Q.-L. [1 ]
Li Z.-C. [1 ]
机构
[1] Xi'an Modern Chemistry Research Institute, Xi'an
关键词
Combustion characteristics; High-energy azidonitramine gun propellant; Insensitive; Low temperature sensitivity coefficient effect; Plugged;
D O I
10.11943/CJEM2019193
中图分类号
学科分类号
摘要
In order to improve the performance of burning progressivity and low temperature sensitive coefficient effect of high-energy azidonitramine gun propellant, three insensitive high-energy azidonitramine gun propellants was prepared by the two-stepprocess with polymer composite materials plugging and energetic composite materials desensitization" (called plugged and insensitive gun propellant in this study), whose inner hole was blocked by polymer composite materials and surface was desensitized. The energetic and static combustion performance of plugged and insensitive gun propellant was investigated by heat of explosion and closed-bomb tests. Results show that compared with the untreated gun propellant, with the increase of the content of plugged and insensitive materials, the heat of explosion of three types of plugged and insensitive gun propellants (WCBF-1/18, WCBF-2/18, WCBF-3/18) decrease by 2.6%, 3.6%, 4.3%, and Pr values increase from 0.471 to 0.552, 0.563, 0.576 respectively. The average absolute values of temperature coefficient of relative combustion activity at high temperature for three types of plugged and insensitive gun propellants WCBF-1/18, WCBF-2/18, WCBF-3/18 are 2.87%, 1.89%, 1.56%, respectively, which are all lower than that of untreated gun propellant, it shows that the low temperature sensitivity coefficient effect in the high and normal temperature ranges for plugged and insensitive gun propellant can be improved. © 2020, Editorial Board of Chinese Journal of Energetic Materials. All right reserved.
引用
收藏
页码:242 / 247
页数:5
相关论文
共 21 条
  • [1] Yang J.-X., Jia Y.-J., Liu G.-Q., Et al., Combustion characteristics of DAGR125 gun propellant, Chinese Journal of Explosives & Propellants, 33, 5, pp. 69-71, (2010)
  • [2] Shi X.-R., Jia Y.-J., Xu M., Analysis on inner micro structure of DAGR125 propellant based on micro focus CT technology, Initiators & Pyrotechnics, 5, pp. 41-45, (2015)
  • [3] Liu S.-W., Liu B., Wang Q.-L., Et al., Temperature coefficient of the modified single-base propellant, Chinese Journal of Energetic Materials(Hanneng Cailiao), 20, 3, pp. 345-348, (2012)
  • [4] Li D., Liu S.-W., Liu B., Et al., The technical route research of improving the interior ballistic performance of the modified single gun propellant, Journal of Gun Launch & Control, 36, 4, pp. 13-18, (2015)
  • [5] Liu B., Chen B., Yao Y.J., Et al., Study on the burning of the modified single base gun propellant, Energy Procedia, 66, pp. 121-124, (2015)
  • [6] Yu H.-F., Li Z.-C., Liu B., Et al., Study on the preparation and properties of modified single-base gun propellant with high nitrogen content, Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 41, 6, pp. 632-636, (2018)
  • [7] Vogelsanger B., Ryf K., EI-technology-the key for high performance propulsion design, 34th Annual Gun and Ammunition Symposium and Exhibition, (1999)
  • [8] Ryf K., Vogelsanger B., Schaedeli U., Et al., Method for producing a functional, high-energetic material
  • [9] Fahrni M., Vogelsanger B., Steinmann A., Et al., Temperature-independent propellant powder
  • [10] Vogelsanger B., Huber A., Jaskolka H., Insensitive propulsion system for large caliber ammunition, Insensitive Munitions and Energetic Materials Technology Symposium, (2007)