Preparation and Properties of Epoxy Resin Coating Layer Modified by Hydroxyl-terminated Epoxidized Polybutadiene/Montmorillonite

被引：0
|
作者：
Xiao R. [1 ,2 ]
Cong R.-M. [1 ,2 ]
Ding Z.-M. [1 ,2 ]
Luo Y.-J. [1 ,2 ]
机构：
[1] School of Material Science & Engineering, Beijing Institute of Technology, Beijing
[2] High Energy Density Materials Key Laboratory of Ministry of Education, Beijing
来源：
Huozhayao Xuebao/Chinese Journal of Explosives and Propellants | 2021年 / 44卷 / 03期
关键词：
Epoxy resin; Hydroxy-terminated epoxidized polybutadiene; Material science; Montmorillonite; Toughening modification;
D O I：
10.14077/j.issn.1007-7812.202104019
中图分类号：
学科分类号：
摘要：
In order to toughen the epoxy resin (EP) coating layer, the organic montmorillonite (OMMT) was peeled off with epoxy butylated hydroxyl (EHTPB) to make EHTPB/OMMT nanocomposite toughener and introduce it into the epoxy resin system. Through Fourier transform infrared spectroscopy (FTIR), low-field nuclear magnetic (LF-NMR), scanning electron microscopy (SEM), static mechanical performance testing, etc., the structure, toughening mechanism and mechanical properties of the modified epoxy resin coating layer were studied. The ablation resistance and bonding performance of the sample with mass ratio of OMMT and EP of 0.2:100 were tested. The results show that when the mass ratio of OMMT and EP is 0.2:100, the elastic modulus of EHTPB/OMMT/EP coating layer decreases by 184.61% compared with that of the referenced sample, while the elongation is increased by 287.55%. The linear ablation rate is 0.155mm/s and the bonding strength is 3.84MPa.It is mainly due to the fact that EHTPB introduces a large number of rubber flexible molecular chains into the epoxy resin matrix, and the OMMT sheet structure can effectively transfer stress, so that the system can absorb more fracture energy and effectively hinder the propagation of microcracks; In addition, OMMT and EP and EHTPB molecular chains form a cross-linked network through hydrogen bonds, which improves toughness. © 2021, Editorial Board of Journal of Explosives & Propellants. All right reserved.
引用
收藏
页码：349 / 355
页数：6
相关论文
共 23 条
  • [1] WU Wei, CHEN Jun, YANG Yue, Et al., Study on inhibition of double-based propellant by silicone rubber, Explosive Materials, 45, 5, pp. 29-34, (2016)
  • [2] AGRAWALJP, POLHARAKARRD, Inhibition of rocket propellant, Journal of Scientific & Industrial Research, 39, 1, pp. 633-640, (1980)
  • [3] ZHAN H A, ZHENG H Y, ZHAO W Z, Et al., Research progress on inhibitor of solid propellant, Chemical Defence on Ships, 3, pp. 1-5, (2009)
  • [4] BIAN Cheng, ZHANG Yan, SHI Yi-juan, Et al., Recent progress of coating technologies for solid propellant, Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 42, 3, pp. 213-222, (2019)
  • [5] LIU Y F, ZHANG D L, JIA J S, Et al., Study on HTPB liner modified with molecular sieve for NEPE propellant, Chemical Propellants Polymeric Materials, 4, 5, pp. 47-49, (2006)
  • [6] XIAO Yan, Classification, application fields and market prospects of epoxy resin, Chemical Industry, 32, 9, pp. 19-24, (2014)
  • [7] LI Dong-lin, NIU Xi-jiang, CUI Wei, The migration and debonding between double base propellant and inhibitor coating, Chinese Journal of Explosives & Propellants(Huozhayao Xuebao), 3, pp. 41-45, (1996)
  • [8] Cheruder Gibson, Adhesion of solid rocket materials, Rubber World, 11, pp. 928-931, (1990)
  • [9] THOMAS R, SINTUREL C, JUURGEN P, Et al., In-situ cure and cure kinetic analysis of a liquid rubber modified epoxy resin, Industrial & Engineering Chemistry Research, 51, 38, pp. 12178-12191, (2012)
  • [10] LEE S E, JEONE E, LEE M Y Y., Improvement of the mechanical and thermal properties of polyethersulfone-modifiede poxycomposites, Journal of Industrial and Engineering Chemistry, 33, pp. 73-79, (2016)
123