Denoising of the kinetic parameters of a RV reducer based on an EMD algorithm

被引：0

作者：

Song L. ^{[1
]}

You D. ^{[2
]}

Zheng Z. ^{[1
]}

Zhou Y. ^{[3
]}

Chen L. ^{[1
]}

机构：

[1] School of Mechanical and Electrical Engineering, Guangdong Polytechnic Normal University, Guangzhou

[2] School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou

[3] Institute of Automotive Engineering Research, Guangzhou Automobile Group Co., Ltd., Guangzhou

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2022年 / 41卷 / 18期

关键词：

consecutive mean square error (CMSE); empirical mode decomposition (EMD); l2-norm; rotate vector (RV) reducer; signal denoising;

D O I：

10.13465/j.cnki.jvs.2022.18.034

中图分类号：

学科分类号：

摘要：

The rotate vector(RV) reducer is one of key transmission mechanisms in modern intelligent equipment. There is usually a great proportion of noise in the measurement signals of its kinetic parameters, which affects the operation accuracy and stability of equipments. A signal-denoising approach based on EMD (empirical mode decomposition) was proposed, which can extract accuratly kinetic parameter signals of the RV reducer effectively. In the approach, the IMFs (intrinsic mode functions) derived from EMD were divided into 3 parts, namely, noise IMFs, noise and information, mixed IMFs and information IMFs, with 2 indexes, CMSE (consecutive mean square error) and l2-norm. Different processing strategies were applied in the 3 parts of IMFs and combining with the PR (part reconstruction) to fulfill the process of denoising. The denoising approach presented has been used in the denoising process of the torque signals of a RV40E reducer. The results show that the SNRs of the denoised signals are improved observably, and the effectiveness of the approach is validated. © 2022 Chinese Vibration Engineering Society. All rights reserved.

引用

下载

页码：266 / 272+290

共 17 条

[1] PHAM A D, AHN H J., High precision reducers for industrial robots driving 4th industrial revolution
[2] state of arts, analysis, design, performance evaluation and perspective [J], International Journal Precision Engineering Manufacturing-Green Technology, 5, 4, pp. 519-533, (2018)
[3] ZHANG Dawei, WANG Gang, HUANG Tian, Et al., Dynamic formulation of RV reducer and analysis of structural parameters [J], Chinese Journal of Mechanical Engineering, 1, pp. 70-75, (2001)
[4] WANG Jiugen, Liangliang KE, Vibration characteristics of a RV reducer [J], Journal of Vibration and Shock, 39, 13, pp. 57-63, (2020)
[5] HIDAKA Teruaki, WANG Hongyou, ISHIDA Takeshi, Et al., Rotational transmission error of K-H-V planetary gears with cycloid gear (1 stf report, analytical method of the rotational transmission error) [J], Journal of Japanese Mechanical Engineering Academy, 60, 570, pp. 645-653, (1994)
[6] ISHIDA Takeshi, WANGHongyou, HIDAKA Teruaki, Et al., Rotational transmission error of K-H-V planetary gears with cycloid gear (2nd report, effect of manufacturing and assembly errors on rotational transmission error) [J], Journal of Japanese Mechanical Engineering Academy, 60, 578, pp. 278-285, (1994)
[7] KIM K H, LEE C S, AHN H J., Torsional rigidity of a two-stage cycloid drive, South Korean Journal of Mechanical Engineering, 33, 11, pp. 1217-1224, (2009)
[8] YANG Yuhu, ZHU Linyu, CHEN Zhenyu, Et al., Analysis of the characteristics of torsional stiffness of RV reducer [J], Journal of Tianjin University (Science and Technology), 48, 2, pp. 111-118, (2015)
[9] YANG Y H, CHEN C, WANG S Y., Response sensitivity to design parameters of RV reducer [J], Chinese Journal of Mechanical Engineering, 31, 3, pp. 1-13, (2018)
[10] HUANG N E, SHEN Z, LONG S R, Et al., The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis [J], Proceedings of the Royal Society of London. Series A, 454, pp. 903-995, (1998)

← 1 2 →