Experimental research on clearance oscillation phenomenon of rolling bearings

被引：0
|
作者：
Liu Z. [1 ]
Liao M. [1 ]
Cao M. [2 ]
Deng W. [3 ]
Zheng K. [2 ]
Yang H. [3 ]
Zhao Y. [2 ]
机构：
[1] School of Power and Energy, Northwestern Polytechnical University, Xi'an
[2] Shenyang Engine Design and Research Institute, AECC, Shenyang
[3] Hunan Aviation Powerplant Research Institute, AECC, Zhuzhou
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2022年 / 41卷 / 20期
关键词：
bearing skidding; clearance; clearance oscillation; light-load; rolling element bearings;
D O I：
10.13465/j.cnki.jvs.2022.20.013
中图分类号：
TH13 [机械零件及传动装置];
学科分类号：
080203 ;
摘要：
A rarely recorded phenomenon of long-period vibration amplitude variation of rotor bearing systems was found on an aeroengine simulate rotor system. In order to analyze this phenomenon, a vibration displacement sensor and a vibration speed sensor were used to carry out a long period test. The influence caused by speed, oil, temperature, load, bearing state, and clearance was analyzed. After the experiments, the bearings were disassembled and replaced with new bearings for experiments. The experiment results show that the long-period vibration amplitude variation of the bearing may be a thermal structural coupling phenomenon of the bearing. The source of the phenomenon is the periodic change of the bearing clearance caused by the sliding and heating of the light load bearing. The clearance oscillation phenomenon is sensitive to the heat dissipation state and radial direction of the bearing. This phenomenon mainly occurs when the working load of the bearing is far lower than the rated load of the bearing. This phenomenon can be eliminated by changing the lubricate oil supply (damaging the heat dissipation balance) or appropriately increasing the unbalanced load. © 2022 Chinese Vibration Engineering Society. All rights reserved.
引用
收藏
页码：100 / 111
页数：11
相关论文
共 9 条
  • [1] CAO Hongmi, HE Zhengjia, ZI Yanyang, Modeling of a high-speed rolling bearing and its damage mechanism analysis [J], Journal of Vibration and Shock, 31, 19, pp. 135-140, (2012)
  • [2] ZHENG Linqing, ZHU Dong, Slip analysis of high sped roller bearing, Lubrication Engineering, 4, pp. 3-8, (1982)
  • [3] HAN Jingwen, WANG Wenzhong, ZHAO Ziqiang, Slip analysis of high speed cylindrical roller bearings, Bearing, 4, pp. 9-14, (2020)
  • [4] LI Feng, DENG Sier, ZHANG Wenhu, Skidding characteristics of ball bearings withstanding a frequent oscillating condition, Journal of Mechanical Engineering, 57, 1, pp. 168-178, (2021)
  • [5] ZHENG Xiangkai, DENG Sier, ZHENG Yanwei, Et al., Analysis on slip rate of cages in ball bearings integrated with squirrel cage elastic support, Bearing, 4, pp. 1-5, (2020)
  • [6] HAN Qinkai, LI Xinglin, YAN Guobin, Et al., Dynamic skidding behavior of skew cylindrical roller bearings under time-variable loads, Journal of Mechanical Engineering, 53, 9, pp. 58-65, (2017)
  • [7] LU Liming, GU Kai, TANG Juntao, Et al., Skidding analysis of cylindrical roller bearing considering fatigue failure, Lubrication, 44, 11, pp. 124-129, (2019)
  • [8] EHRICH F F., Observations of nonlinear phenomena in rotordynamics, Journal of System Design and Dynamics, 2, 3, pp. 641-651, (2008)
  • [9] ZHANG W G., High speed spindle heat sources, thermal analysis and bearing protection, (1993)
1