SECTION PERFORMANCE AND CURVATURE ANALYSIS OF VERTICAL CORRUGATED STEEL PLATE COMPOSITE SHEAR WALLS

被引：0
|
作者：
Wang W. [1 ]
Li Y. [1 ]
Quan C.-C. [1 ]
Chen L.-L. [1 ]
Xu J. [1 ]
Jia Y. [1 ]
机构：
[1] School of Civil Engineering, Xi’an University of Architecture & Technology, Shaanxi, Xi’an
来源：
Gongcheng Lixue/Engineering Mechanics | 2023年 / 40卷 / 07期
关键词：
moment curvature analysis; section analysis model; section curvature; section performance; simplified calculation; vertical corrugated steel plate composite shear walls;
D O I：
10.6052/j.issn.1000-4750.2021.11.0900
中图分类号：
学科分类号：
摘要：
The current seismic design method based on load bearing capacity lacks an accurate reflection of the cross-sectional performance of members, and the performance requirements of important lateral force resisting members such as shear walls under seismic action are not reflected. The vertical corrugated steel plate composite shear walls exhibit good seismic performance due to the excellent geometric advantages of the embedded corrugated steel plate, and the analysis of their cross-sectional performance is yet to be investigated. Based on the combined mechanism and damage phenomena of the vertical corrugated steel plate composite shear walls, the theoretical calculation method of section curvature and the calculation procedure of converting the load displacement curve into bending moment curvature curve are presented in this study. The accuracy of the theoretical calculation method and the applicability of the numerical calculation model are verified by experimental data. Expanded research is also performed on the influence of corrugated steel plates, of boundary elements, of distributed steel bars, and of material properties such as concrete strength and steel strength on section curvature and curvature ductility under different axial pressures. The correlation analysis found that the boundary element is the only parameter that maintains a positive correlation with the curvature of the characteristic point and the curvature ductility. The proposed simplified calculation formulas for the section yield, peak, ultimate curvature of the vertical corrugated steel plate composite shear walls have been proved accurate and applicability, which can provide some kind of theoretical support to calculate the elastoplastic deformation capacity and its damage control. © 2023 Tsinghua University. All rights reserved.
引用
收藏
页码：82 / 98
页数：16
相关论文
共 32 条
  • [1] QIAN Jiaru, LYU Wen, FANG Ehua, Displacement ductility-based aseismic design for shear walls, Journal of Building Structures, 20, 3, pp. 42-49, (1999)
  • [2] WANG Bin, SHI Qingxuan, CAI Wenzhe, Curvature analysis and ductility calculation of flanged shear walls, Engineering Mechanics, 36, 12, pp. 165-176, (2019)
  • [3] QIAN Jiaru, XU Fujiang, Displacement-based deformation capacity design method of RC cantilever walls, Journal of Tsinghua University (Science and Technology), 47, 3, pp. 305-308, (2007)
  • [4] YAN Lizhen, LIANG Xingwen, XU Jie, Et al., Research on calculation method of deformation capacity of reinforced concrete shear wall, Engineering Mechanics, 31, 11, (2014)
  • [5] ZHOU Y, ZHANG D, HUANG Z, Et al., Deformation capacity and performance-based seismic design for reinforced concrete shear walls [J], Journal of Asian Architecture and Building Engineering, 13, 1, pp. 209-215, (2014)
  • [6] PRIESTLEY M J N, KOWALSKY M J., Aspects of drift and ductility capacity of rectangular cantilever structural walls [J], Bulletin of the New Zealand Society for Earthquake Engineering, 31, 2, pp. 73-85, (1998)
  • [7] ZHAO Huajing, LIANG Xingwen, SONG Can, Yield displacement calculation method of high-strength concrete shear wall, Journal of Civil and Environmental Engineering, 36, 3, pp. 80-85, (2014)
  • [8] ZHAO Huajing, LI Qingning, ZHAO Jun, Et al., Calculation method for moment-curvature of high strength concrete shear wall confined with high strength rectangle spiral reinforcements, Engineering Mechanics, 37, 9, pp. 123-132, (2020)
  • [9] RONG Chong, SHI Qingxuan, Confining mechanism and section curvature analysis of steel truss confined concrete composite columns, China Civil Engineering Journal, 54, 1, pp. 49-61, (2021)
  • [10] WANG W, WANG Y, LU Z., Experimental study on seismic behavior of steel plate reinforced concrete composite shear wall [J], Engineering Structures, 160, pp. 281-292, (2018)
1234