Effect of the degree of rivet opening on the rigidity of the interlock in self-piercing riveting joints

被引:0
|
作者
Zeng, Kai [1 ]
He, Xiaocong [1 ]
Xing, Baoying [1 ]
机构
[1] Kunming University of Science and Technology, Kunming,650500, China
关键词
Digital devices - Finite element method - Image processing - Stability - Deformation - Rigidity - Riveting - Stiffness - Tensile testing - Processing;
D O I
10.12073/j.hjxb.2019400169
中图分类号
学科分类号
摘要
The effect of the degree of rivet opening on the rigidity of the interlock in 5052 a-alloy self-piercing riveting joints was analyzed by using image processing method. Two type joints with different rivet opening were tested in the proper test machine. The CCD with digital microscope was used to capture the images of the interlock deformation in the loading process. The relative slip between the rivet tip and the bottom sheet was calculated by using correlation analysis method, and the amount of the slip was defined as a measure of stiffness of SPR joints. Finite element models of two type joints with different rivet opening were established to simulate the deformation process of the interlock in tensile test. The results show that a critical value of slip-loading exists in the loading process. When the load value is lower than the critical value, the structural integrity of the interlock is kept and no apparent slip in the interlock can be detected. When the load value is greater than the critical value, the slip in the interlock can be observed and it increases with the increasing of the loading, and the rivet is pulled out, which is named pull-out failure model. The open degree of rivets has a large effect on the strength and rigidity of SPR structure, and high rivet degree can increase the stiffness of SPR joints. © 2019, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码:143 / 147
相关论文
共 50 条
  • [1] Self-piercing riveting with inner flange pipe rivet
    Huang, Zhichao
    Xue, Shuguang
    Lai, Jiamei
    Xia, Lingjun
    Zhan, Jinqing
    [J]. 11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 2042 - 2047
  • [2] NUMERICAL SIMULATION OF SELF-PIERCING RIVETING WITH SOLID RIVET
    Huang Zhichao
    Jiang Ning
    Wang Jianzhong
    [J]. INNOVATION & SUSTAINABILITY OF MODERN RAILWAY PROCEEDINGS OF ISMR' 2008, 2008, : 586 - 591
  • [3] Self-piercing riveting
    Scienza e tecnica
    [J]. Murgia, M., 1600, Instituto Italiano della Saldatura, Lungobisagno Istria 5, Genua, 16141, Italy (65):
  • [4] Forced Vibration Behavior of Self-piercing Riveting Joints
    He, Xiaocong
    Zhenz, Dong
    Xing, Baoying
    Zeng, Kai
    Gu, Fengshou
    Ball, Andrew
    [J]. ADVANCED MATERIALS & SPORTS EQUIPMENT DESIGN, 2014, 440 : 153 - +
  • [5] The numerical analysis of the effect of the joining process parameters on self-piercing riveting using the solid rivet
    J. Mucha
    [J]. Archives of Civil and Mechanical Engineering, 2014, 14 : 444 - 454
  • [6] Effect of galvanic corrosion on durability of aluminium/steel self-piercing rivet joints
    Calabrese, L.
    Proverbio, E.
    Pollicino, E.
    Galtieri, G.
    Borsellino, C.
    [J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2015, 50 (01) : 10 - 17
  • [7] Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets
    Huang, Zhichao
    Yao, Qiuhua
    Lai, Jiamei
    Zhao, Jingwei
    Jiang, Zhengyi
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (5-8): : 2315 - 2328
  • [8] Improvement of a rivet geometry for the self-piercing riveting of high-strength steel and multi-material joints
    Benedikt Uhe
    Clara-Maria Kuball
    Marion Merklein
    Gerson Meschut
    [J]. Production Engineering, 2020, 14 : 417 - 423
  • [9] Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets
    Zhichao Huang
    Qiuhua Yao
    Jiamei Lai
    Jingwei Zhao
    Zhengyi Jiang
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 91 : 2315 - 2328
  • [10] Design of Helical Self-Piercing Rivet for Joints in Variable Sheets
    Park, Myung Soo
    Lim, Jae Bum
    Cho, Hae Young
    [J]. TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2018, 42 (04) : 347 - 352