Experimental Study on Cluster Magnetorheological Variable Gap Dynamic Pressure Planarization Finishing

被引：0
|
作者：
Yan Q. [1 ]
Liao B. [1 ]
Lu J. [1 ]
Fu Y. [1 ]
机构：
[1] School of Mechanical and Engineering, Guangdong University of Technology, Guangzhou
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2021年 / 57卷 / 19期
关键词：
Cluster magnetorheological planarization finishing; Material removal rate; Planarization finishing; Surface roughness; Variable gap dynamic pressure;
D O I：
10.3901/JME.2021.19.230
中图分类号：
学科分类号：
摘要：
In order to improve the effect of cluster magnetorheological planarization finishing of photoelectric wafer, a method of cluster magnetorheological variable gap dynamic pressure planarization finishing is proposed, and the influence of various process parameters on the polishing effect is explored. Using the sapphire wafer as the research object, a comparative experiment of cluster magnetorheological variable gap dynamic pressure planarization finishing and cluster magnetorheological finishing is carried out. The surface roughness and material removal rate of the finishing surface is detected, the finishing surface morphology and the morphological changes of the magnetic chain string in the cluster magnetorheological polishing pad before and after dynamic squeeze is observed, the influence of squeeze parameters such as squeeze amplitude, workpiece disk rotation speed, squeeze frequency and minimum machining gap on the machining effect is studied. The experiment shows that after the cluster magnetorheological planarization finishing applies the axial low-frequency vibration of the workpiece, the magnetic chain string formed in the cluster magnetorheological polishing pad is thicker, which not only makes the magnetorheological polishing fluid flow along the radial direction of the workpiece to realize the dynamic update of the abrasive particles, promoting the increase of the number of effective abrasive particles in the finishing interface, but also the dynamic polishing pressure is generated in the machining gap between workpiece and polishing disk, and make the abrasive and surface scratching process soft and micro-quantified, which forms a mechanism to improve the removal efficiency of the material and reduce the roughness of the processed surface. Compared with the effect of cluster magnetorheological finishing, the cluster magnetorheological variable gap dynamic pressure planarization finishing has a material removal rate increased by 19.5%, the surface roughness is reduced by 42.96%. Finishing under the process parameters of squeeze vibration frequency 1 Hz, minimum machining gap 1 mm, squeeze amplitude 0.5 mm, workpiece disk rotation speed 500 r/min can obtain an ultra-smooth surface with a surface roughness of Ra 0.45 nm, material removal rate reached 3.28 nm/min. It is proved that the cluster magnetorheological variable gap dynamic pressure planarization finishing is feasible and effective. © 2021 Journal of Mechanical Engineering.
引用
收藏
页码：230 / 238
页数：8
相关论文
共 21 条
  • [1] XU Y, LU J, XU X., Study on planarization machining of sapphire wafer with soft-hard mixed abrasive through mechanical chemical polishing, Applied Surface Science, 389, pp. 713-720, (2016)
  • [2] JIAO L, WU Y, WANG X, Et al., Fundamental performance of magnetic compound fluid (MCF) wheel in ultra-fine surface finishing of optical glass, International Journal of Machine Tools and Manufacture, 75, pp. 109-118, (2013)
  • [3] SEOK J, KIM Y, JANG K, Et al., A study on the fabrication of curved surfaces using magnetorheological fluid finishing, International Journal of Machine Tools and Manufacture, 47, 14, pp. 2077-2090, (2007)
  • [4] FENG S, YONG S, DAI Y, Et al., Magnetorheological elastic super-smooth finishing for high-efficiency manufacturing of ultraviolet laser resistant optics, Optical Engineering, 52, 7, (2013)
  • [5] HALLOCK B, DUMAS P, SHOREY A, Et al., Recent advances in deterministic low-cost finishing of sapphire windows, Window and Dome Technologies and Materials IX, 5786, pp. 154-164, (2005)
  • [6] PAN Jisheng, YAN Qiusheng, LU Jiabin, Et al., Cluster magnetorheological effect plane polishing technology, Journal of Mechanical Engineering, 50, 1, pp. 205-212, (2014)
  • [7] LU Jiabin, SUN Shikong, YAN Qiusheng, Et al., Effects of abrasive characteristics on the cluster magnetorheological polishing of InP wafer, Semiconductor Manufacturing Technology, 44, pp. 32-37, (2019)
  • [8] PAN J S, YU P, YAN Q S, Et al., An experimental analysis of strontium titanate ceramic substrates polished by magnetorheological finishing with dynamic magnetic fields formed by rotating magnetic poles, Smart Materials and Structures, 26, 5, (2017)
  • [9] YU P, PAN J S, YAN Q S., Magnetorheological finishing with tangential magnetic fields formed by the rotation of a magnetic pole, International Journal of Abrasive Technology, 7, 4, pp. 307-320, (2016)
  • [10] KUM C W, SATO T, WAN S., Surface roughness and material removal models for magnetorheological finishing, International Journal of Abrasive Technology 15, 6, 1, pp. 70-91, (2013)
123