Structure coupling between hydraulic roof support and surrounding rock in extra-thick and hard coal seam with super large cutting height and longwall top coal caving operation

被引：0
|
作者：
Xu Y. [1 ,2 ]
Wang G. [1 ,2 ]
Li M. [1 ,2 ]
Zhang J. [1 ,2 ]
Han H. [1 ,2 ]
机构：
[1] Mining Institute, China Coal Research Institute, Beijing
[2] Coal Mining & Designing Department, Tiandi Science & Technology Co., Ltd., Beijing
来源：
Meitan Xuebao/Journal of the China Coal Society | 2019年 / 44卷 / 06期
关键词：
Coupling of structure; Extra-thick and hard coal seam; Longwall top coal caving; Structure of hydraulic roof support; Structure of surrounding rock;
D O I：
10.13225/j.cnki.jccs.2019.0073
中图分类号：
学科分类号：
摘要：
Aimed at the challenges, such as long overhanging top-coal, poor cavability, low recovery and incoordination of coal cutting and coal drawing, faced in longwall top coal caving (LTCC) mining with extra-thick and hard coal seam in Yushen mining area, the authors discussed the feasibility and necessity of LTCC operation with super-large cutting height (greater than 6.0 m), and analyzed the coupling between hydraulic roof support and surrounding rock.Based on the coupling of strength, stiffness and stability of support-surrounding rock, a structure coupling theory of support-surrounding rock in LTCC mining with super-large mining height is put forward.The concepts and theories of "small structure" primary coupling, active supporting, and "large structure" secondary coupling, passive bearing, in the support system of hydraulic supports and the surrounding rock are explained from the perspective of the interaction mechanism between them.The authors analyzed the influence of "large and small structure" coupling of surrounding rock on the supporting effect and adaptability.It is pointed out that the structural design of hydraulic support used in LTCC not only needs to meet the requirement of adaptation of small structure supporting system to the strong dynamic load caused by periodic failure and instability of large structure, but also needs to consider the influence of the structure of hydraulic support (especially the structure of coal drawing mechanism) on the caving and migration law of hard top-coal, as well as the load evolution process of the support.The coupling between the structure of hydraulic support and the structure of caved top-coal can realize a smooth drawing of top coal and improve the recovery rate of top-coal.The methods of theoretical analysis, similarity simulation, numerical simulation and field investigation are adopted to analyze the caving and drawing structure of hard top coal and the arching effect during the coal drawing process.The influence of the structure height of hydraulic support on the caving structure and resource recovery rate of the top coal is discussed.The effect of caving mechanism structure on the arch structure of top coal and the secondary crushing effect of caving mechanism structure on top coal are studied.The structural improvement and optimization strategies of the strong coal drawing mechanism are put forward, and the mechanism and effect of coal breaking are discussed.This paper would provide guidance and reference for the coupling theory of hydraulic roof support and surrounding rock in similar hard and extremely thick coal seam. © 2019, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码：1666 / 1678
页数：12
相关论文
共 13 条
  • [1] Wang G., Pang Y., Relationship between hydraulic support and surrounding rock coupling and its application, Journal of China Coal Society, 40, 1, pp. 30-34, (2015)
  • [2] Xu Y., Wang G., Supporting principle and bearing characteristics of hydraulic powered roof support groups, Chinese Journal of Rock Mechanics and Engineering, 36, pp. 3367-3373, (2017)
  • [3] Wang G., Pang Y., Surrounding rock control theory and longwall mining technology innovation, International Journal of Coal Science & Technology, 4, 4, pp. 301-309, (2017)
  • [4] Qian M., Determination of basic parameters of hydraulic roof support based on the mechanics relationship of surrounding rock movement, Coal Science and Technology, 11, pp. 1-7, (1978)
  • [5] Han Z., Zhao T., Xie X., Technology of improving top coal caving property in hard thick coal seam with shallow mining depth, Coal Mining Technology, 21, 1, pp. 18-20, (2016)
  • [6] Hu J., Chang B., Technology of water injection for weakening top coal with horizontal section in steeply thick coal seam fully mechanized top-coal caving face, Coal Science and Technology, 45, pp. 55-58, (2017)
  • [7] Wang J., Fu Q., The loose medium flow field theory and its application on the longwall top-coal caving, Journal of China Coal Society, 27, 4, pp. 337-341, (2002)
  • [8] Wang X., Xiao Z., Chen J., Establishment of critical diameter of a discharge hopper, Mining and Metallurgical Engineering, 17, 1, pp. 13-16, (1997)
  • [9] Kang J., Wang J., The mechanical model of the overburden rock under mining and the broken condition analysis, Journal of China Coal Society, 27, 1, pp. 16-20, (2002)
  • [10] Qian M., Miao X., He F., Analysis of key block in the structure of voussoir beam in longwall mining, Journal of China Coal Society, 19, 6, pp. 557-563, (1994)
12