Seismic performance and corresponding design method of rocking self-centering bridge bents equipped with lead-extrusion dampers

被引：0
|
作者：
Shi Y. [1 ]
Zhong Z.-W. [1 ]
Qin H.-G. [1 ]
Han J.-P. [1 ]
Sun Z.-G. [2 ]
Wang J.-W. [3 ]
机构：
[1] School of Civil Engineering, Lanzhou University of Technology, Lanzhou
[2] School of Civil Engineering, Institute of Disaster Prevention, Beijing
[3] School of Civil Engineering, Shijiazhuang Tiedao University, Shijiazhuang
来源：
Gongcheng Lixue/Engineering Mechanics | 2021年 / 38卷 / 08期
关键词：
Energy modify factor; Equivalent energy-based design procedure; Lead-extrusion dampers; OpenSees; Rocking self-centering bridge bent;
D O I：
10.6052/j.issn.1000-4750.2020.08.0575
中图分类号：
学科分类号：
摘要：
To develop the self-centering two-column bents and achieve the seismic damage control, lead-extrusion dampers (LEDs) were selected as the external energy dissipaters, and a rocking self-centering bridge bent system equipped with LEDs was proposed. The seismic performance of this system was studied, and a corresponding design method which was based on the equivalent energy-based design procedure (EEDP) was developed. Initially, the numerical analysis model of RSC-LEDs bridge bent was established, and the simulation method was validated by an existing cyclic test of a RSC bridge bent specimen. Then the effect of LED output force, gravity load of superstructure, prestressing force, areas of unbonded tendon and cap beam-to-column stiffness ratio on the seismic performance of RSC-LEDs bridge bents was studied. 32 RSC bridge bents with different parameters were designed to conduct regressive analysis, and semi-empirical formulas were given to calculate the effective stiffness and yield strength of RSC-LEDs bridge bents. Combining the Chinese seismic code and EEDP, a two-stage seismic design method was proposed for RSC-LEDs bridge bents, and the results show that the obtained semi-empirical formulas can estimate the effective stiffness and yield strength accurately. The RSC-LEDs bridge bents designed by the proposed method can achieve the target capacity curve, and is able to remain elastic under E1 level earthquake. The LEDs start to dissipate energy under E2 level earthquake and the seismic displacement demand can be controlled within a design range. © 2021, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：166 / 177and203
相关论文
共 38 条
  • [1] Li J, Peng T, Xu Y., Damage investigation of girder bridges under the Wenchuan earthquake and corresponding seismic design recommendations, Earthquake Engineering and Engineering Vibration, 7, 4, pp. 337-344, (2008)
  • [2] Han Q, Du X, Liu J, Et al., Seismic damage of highway bridges during the 2008 Wenchuan earthquake, Earthquake Engineering and Engineering Vibration, 8, 2, pp. 263-273, (2009)
  • [3] Shi Yan, Wang Dongsheng, Han Jianping, Displacement-based design method for bridge bents with buckling-restrained braces, China Civil Engineering Journal, 50, 7, pp. 62-68, (2017)
  • [4] Kawashima K, Unjoh S, Hoshikuma J I, Et al., Damage of bridges due to the 2010 Maule, Chile earthquake, Journal of Earthquake Engineering, 15, 7, pp. 1036-1068, (2011)
  • [5] Shi Y, Zhong Z, Qin H, Et al., Toggle buckling-restrained brace systems and a corresponding design method for the seismic retrofit of bridge bents, Engineering Structures, 221, (2020)
  • [6] Du Xiuli, Zhou Yulong, Han Qiang, Et al., State-of-the-art on rocking piers, Earthquake Engineering and Engineering Dynamics, 38, 5, pp. 1-11, (2018)
  • [7] Wang Jingquan, Wang Zhen, Gao Yunfeng, Et al., Review on seismic behavior of precast piers: new material, new concept, and new application, Engineering Mechanics, 36, 3, pp. 1-23, (2019)
  • [8] Han Qiang, Jia Zhenlei, He Weili, Et al., Seismic design method and its engineering application of self-centering double-column rocking bridge, China Journal of Highway and Transport, 30, 12, pp. 169-177, (2017)
  • [9] Ou Y, Wang P, Tsai M S, Et al., Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions, Journal of Structural Engineering, 136, 3, pp. 255-264, (2009)
  • [10] Tong T, Zhuo W, Jiang X, Et al., Research on seismic resilience of prestressed precast segmental bridge piers reinforced with high-strength bars through experimental testing and numerical modelling, Engineering Structures, 197, (2019)
1234