Shaking table test of high-level isolation connected structure with gap damper device

被引：0

作者：

Lü Q. ^{[1
,2
,3
]}

Lu W. ^{[4
]}

Fu B. ^{[5
,6
]}

Xiong Y. ^{[7
]}

Qian W. ^{[1
]}

机构：

[1] School of Civil and Transportation Engineering, Ningbo University of Technology, Ningbo

[2] Key Laboratory of Earthquake Engineering and Engineering Vibration, China Earthquake Administration, Harbin

[3] Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin

[4] State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai

[5] School of Civil Engineering, Chang’an University, Xi’an

[6] Key Laboratory of Building Structural Retrofitting and Underground Space Engineering, Ministry of Education, Shandong Jianzhu University, Jinan

[7] School of Civil and Hydraulic Engineering, Ningxia University, Yinchuan

来源：

Jianzhu Jiegou Xuebao/Journal of Building Structures | 2024年 / 45卷 / 04期

关键词：

connected structure; gap damper; high-level isolation; seismic performance; shaking table test;

D O I：

10.14006/j.jzjgxb.2023.0007

中图分类号：

学科分类号：

摘要：

A gap damper device was proposed to control the displacement of isolation bearing of the corridor when a high-level isolation connected structure was subjected to rare earthquakes. A twin tower connected model structure with an aspect ratio of 6 was firstly designed. The corridor and tower were connected by the isolation only and by the combination of the isolation and gap damper device, respectively. The two structural systems were tested by a series of shaking table tests. The far-field El Centro wave and pulse-like near-field Chi-Chi and Kobe waves were selected as seismic excitations. The horizontal displacement of the isolation bearing, the force and displacement responses of the gap damper device, the acceleration response of the corridor, and the acceleration and displacement responses of the tower structure were measured. The control effect of the gap damper device on the displacement of isolation bearing under rare and extremely rare earthquakes, as well as the influence of the gap damper device on the corridor and tower structure were analyzed. The results show that the gap damper device can effectively control the isolation bearing displacement under rare and extremely rare earthquakes. Under the rare earthquakes with intensity 8, the maximum displacement of the isolation bearing can be reduced by up to 59. 61%. The gap damping device generates a severe impact between the transmission shaft and limit ring, inducing high-frequency vibration energy into the corridor structure. The horizontal acceleration responses of the corridor are amplified, and the vertical acceleration responses are more serious. Under the far-field earthquakes, the activation of the gap damping device increases the floor acceleration response and inter-story drift of the tower structures to some extent, but it do not cause adverse effects on the tower structures. Under the near-field earthquakes, where the velocity pulse period is close to the fundamental natural period of the overall structure, the gap damping device provides some seismic control effects on the tower structures. When the peak ground acceleration of the ground motion is 0. 40g, the peak acceleration and peak inter-story drift of the tower structure are reduced by 24. 09% and 31. 7%, respectively. © 2024 Science Press. All rights reserved.

引用

页码：12 / 23

页数：11

共 26 条

[1] LU Xilin, Seismic theory of complex high-rise buildings with application, pp. 628-638, (2015)
[2] SHEN Chaoyong, ZHOU Fulin, WU Yi, Et al., Experimental study on a high-rise building model with complicated shape and a joint gallery, Journal of Guangzhou University (Natural Science Edition), 3, 2, pp. 143-149, (2004)
[3] LU X, CHEN L, ZHOU Y, Et al., Shaking table model tests on a complex high-rise building with two towers of different height connected by trusses [ J ], Structural Design of Tall and Special Buildings, 18, 7, pp. 765-788, (2009)
[4] HUANG Zhihua, LU Xilin, ZHOU Ying, Et al., Shaking table model test of a multi-tower connected structure, Journal of Building Structures, 30, 5, pp. 31-38, (2009)
[5] NISHIMURA A, YAMAMOTO H, KIMURA Y, Et al., Base-isolated super high-rise RC building composed of three connected towers with vibration control systems [J], Structural Concrete, 12, 2, pp. 94-108, (2011)
[6] LEE D G, KIM H S, KO H., Evaluation of coupling-control effect of a sky-bridge for adjacent tall buildings, Structural Design of Tall and Special Buildings, 21, 5, pp. 311-328, (2012)
[7] LI Yongshuang, XIAO Congzhen, JIN Linfei, Et al., Displacement analysis and control study on support of high-rise structures connected with high corridor, China Civil Engineering Journal, 46, 12, pp. 1-8, (2013)
[8] LIU Zhigang, HOU Yueqi, ZHU Ligang, Et al., Seismic isolation design of sky bridge for Raffles City in Chongqing, Building Structure, 45, 24, pp. 9-15, (2015)
[9] XU Ziguo, XIAO Congzhen, LIAO Yubiao, Et al., Analysis of the seismic-isolated connected structures for MOMA [ J ], China Civil Engineering Journal, 41, 3, pp. 53-57, (2008)
[10] PAN Yi, ZHAO Chongjin, CHANG Zhiwang, Et al., Shaking table test of connected structure with large-span special-shaped steel corridor, China Civil Engineering Journal, 52, 2, pp. 66-76, (2019)

← 1 2 3 →