Interpolation-based contour error estimation and componentbased contouring control for five-axis CNC machine tools

High accuracy contour error estimation and direct contour error control are two major approaches to reduce the contour error.However, two key factors make them complex for five-axis machine tools: the nonlinear kinematics and the coupling between the tool position and orientation. In this study, by finding the reference point nearest to the current actual position, and interpolating the point with two neighboring reference points and using the distance ratio, a new contour error estimation method for five-axis machine tools is proposed, which guarantees high accuracy while depending on only the reference points. By adding a weighted contour error on the tracking error in the workpiece coordinate system, and specifying a desired second-order error dynamics based on the error variable, an effective contouring control method is proposed, which can alleviate the problem: when the contour error components are introduced into the controller, the contour errors increase instead in some regions of the tracking trajectory. A series of experiments are performed on a tilting-rotary-table(TRT) type five-axis machine tool. The results reveal that the proposed estimation method has high accuracy, and compared with the case without contour error control, the proposed control approach can reduce the contour error along the whole trajectory.