Design and simulation of bifacial perovskite solar cell with high efficiency using cubic plasmonic nanoparticles

Bifacial perovskite solar cells (Bi-PSCs) are gaining attention for their ability to exceed the efficiency limits of traditional single-junction cells by absorbing light from both the front and rear surfaces. This study explores a novel approach to boost the efficiency and stability of Bi-PSCs by integrating clusters of cubic metallic nano- particles (NPs) within the absorber layer. These plasmonic NPs, embedded in the middle of the absorber layer, significantly enhance light absorption, resulting in substantial improvements in power conversion efficiency for both front and rear irradiation. Our three-dimensional simulations demonstrate that incorporating Ag-based NPs can achieve efficiency enhancements of 29.89 % (from 18 % to 23.39 %) for front irradiation and 29.63 % (from 17.22 % to 22.33 %) for rear irradiation. Ag-based NPs exhibit the most notable efficiency improvement, reaching a short-circuit current of 41.30 mA/cm2 2 and an efficiency of 35.34 % at an albedo of 0.5. To address potential issues such as corrosion and degradation of the perovskite material, the metallic NPs are encapsulated with a thin dielectric nano-shell of SiO2. This encapsulation strategy effectively prevents degradation, ensuring the long-term stability of the Bi-PSCs. The results indicate that the use of clusters of cubic metallic NPs, combined with dielectric encapsulation, offers a superior approach to optimizing the performance and stability of Bi-PSCs, providing a more efficient alternative to increasing the absorber layer's thickness.