Sludge-derived alginate-like extracellular polymers (ALE) for preparation of Fe-ALE and FeCaMg-ALE: Application to the adsorption of phosphate

Excess phosphorus (P) in wastewater has potential risk of causing harmful algal bloom and eutrophication in receiving wastewater. In this study, alginate-like extracellular polymers (ALE) derived from conventional activated sludge were modified with ionic cross-linking agents (Fe3+, Ca2+, and Mg2+) to develop Fe-ALE and FeCaMg-ALE for the adsorption of phosphate from wastewater. The adsorption process of phosphate by Fe-ALE and FeCaMg-ALE can be well described by pseudo-second-order kinetics and Freundlich isotherm model with a high level of accuracy, indicating that the adsorption processes were chemical, multi-layer adsorption process. The maximum adsorption capacity of dry Fe-ALE and FeCaMg-ALE concerning phosphate were 15.06 and 20.10 mg/g, respectively at 298 K. The adsorption capacity remained relatively consistent across a pH range of 2.0-11.0. FT-IR, XRD, SEM coupled with XPS analysis demonstrated the ALE had been successfully compounded with Fe3+ or Fe3+/Ca2+/Mg2+. Based on the experimental results and characteristic analysis, the main mechanism of phosphate by Fe-ALE and FeCaMg-ALE are physical filling, electrostatic attraction, ligand exchange and precipitation reaction. This work provides a new perspective for preparing ALE-based adsorbent using conventional activated sludge as raw material, realizing the treatment of waste with waste and effectively recovering phosphate from wastewater.