A study on properties of electroless Ni-B/MgB2 coatings on AZ91 magnesium alloy

This study explores MgB2 2 as a reinforcing agent in electroless deposition on AZ91 magnesium alloy substrates, evaluating its impact on coating properties. X-ray diffraction (XRD) analysis shows that the amorphous Ni-B coating masks initial magnesium peaks, while MgB2 2 enhances MgB2O(OH)6, 2 O(OH) 6 , MgB2O5, 2 O 5 , MgO, and MgB2xOy 2 x Oy oxide phases. SEM images illustrate morphological shifts from cauliflower-like Ni-B structures to dendritic and fibrous MgB2 2 forms, with higher MgB2 2 concentrations leading to granular structures with randomly oriented crystallites resembling platelets, indicating increased magnesium content. MgB2-reinforced 2-reinforced Ni-B coatings exhibited higher hardness than the substrate but lower than as-deposited Ni-B. Friction coefficients initially decreased with Ni-B, increased significantly with 0.1 g MgB2, 2 , and decreased with higher reinforcements, remaining higher than substrate and as-deposited Ni-B. MgB2 2 reinforcement increased surface roughness, causing local agglomerations in 0.5 g MgB2 2 coatings. Contact angle measurements demonstrated enhanced hydrophilicity due to MgB2's 2 's superhydrophilic properties influenced by surface roughness. Antibacterial tests revealed superior properties with 0.1 g MgB2, 2 , suggesting a transition to MgB2-enriched 2-enriched structures and influencing material properties. While NiB/MgB2 2 coatings improved over substrate, further research is needed to optimize parameters and understand stabilizer effects. These coatings also exhibited superhydrophilicity and promising antibacterial properties, suggesting potential in advanced surface engineering applications.