Influence of the external magnetic field on structural characteristics of granular Co-Cu thin film alloys

We present the results of experimental studies of the influence of an external magnetic field on the structural characteristics (surface roughness and structural entropy) of nanogranular thin-film system based on Co and Cu. The samples CoxCu100-x in a wide range of compositions (17 at. % <= x <= 69 at. %) with the thickness of d = 35 nm were obtained by electron-beam co-evaporation using two independent electron guns. After obtaining, the films were annealed in a vacuum at a temperature of 800 K for 30 min. The studies of magnetoresistive properties have shown that the maximum giant magnetoresistance (GMR) amplitude (1.7 % in the transverse and 1.6 % in the longitudinal measurement geometries) in a magnetic field of H = 4.5 kOe at room temperature was observed in the Co21Cu79 film alloy. Transmission electron microscopy showed that this sample contains hcp-Co granules with a size of L = 5 divided by 12 nm in a matrix of metastable fcc-Cu(Co) solid solution. The influence of the external magnetic field on the structural characteristics and surface morphology of the Co21Cu79 thin-film alloy was investigated using atomic force microscopy (AFM). It was found that a first impact of application of external magnetic field with H = 0.5 kOe causes a decrease in the values of the arithmetic mean Ra, and quadratic mean Rq, of the film roughness and structural entropy S. A decreases in Ra by 8.5%, Rq by 6.5%, and structural entropy S by 6.5 % were observed. After application of a larger magnetic field with H = 1.0 kOe and during the subsequent relaxation of the structure within 15 h after the field is turned off, the values of the structural parameters of the film surface did not change significantly.