Residual Stresses in Wire Arc Additive Manufacturing Products and Their Measurement Techniques: A Systematic Review

被引:0
|
作者
Gurmesa, Fakada Dabalo [1 ]
Lemu, Hirpa Gelgele [2 ]
Adugna, Yosef Wakjira [2 ]
Harsibo, Mesfin Demise [3 ]
机构
[1] Jimma Univ, Jimma Inst Technol, Fac Mech Engn, POB 378, Jimma, Ethiopia
[2] Univ Stavanger, Fac Sci & Technol, Dept Mech & Struct Engn & Mat Sci, N-4036 Stavanger, Norway
[3] Wolkite Univ, Coll Engn & Technol, Dept Mechanican Engn, POB 07, Welkite, Ethiopia
来源
APPLIED MECHANICS | 2024年 / 5卷 / 03期
关键词
residual stress; wire arc additive manufacturing; process parameters; residual stress measurement; wire arc additive manufacturing assessment; MECHANICAL-PROPERTIES; BEAD GEOMETRY; HEAT INPUT; PROCESS PARAMETERS; AUSTENITIC STEEL; ALUMINUM-ALLOY; MICROSTRUCTURE; WAAM; COMPONENTS; DISTORTION;
D O I
10.3390/applmech5030025
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This literature review provides an in-depth exploration of the research conducted on residual stresses (RS) in Wire Arc Additive Manufacturing (WAAM) products, particularly focusing on how process parameters influence the phenomenon. The motivation of the study is the growing focus on WAAM technology and the observation that RS plays a crucial role in determining the mechanical behavior and structural integrity of WAAM components. Thus, the review is intended to provide a better understanding of the relationship between process parameters and RS to optimize the WAAM process and ensure the durability of the final products. It also summarizes key findings, measurement techniques, challenges, and future directions in this evolving field. The review also analyzes measurement techniques used to characterize RS in products fabricated by WAAM as a function of process parameters. Experimental measuring techniques and numerical analysis of RS to determine the impacts of RS in mechanical responses in products of WAAM were discussed. Experimental measuring techniques, such as X-ray diffraction, neutron diffraction (ND), contour and ND, digital image correlation, thermomechanical coupling and contour, and hole-drilling methods, along with numerical simulations like finite element analysis, are discussed to determine the impacts of RS on the mechanical responses of WAAM products. Additionally, it addresses the influence of thermal cycles, cooling rates, and deposition strategies on RS formation. The role of material properties, such as thermal conductivity and expansion coefficients, in RS development is also considered. By offering a comprehensive overview of current research trends and insights, this review serves as a valuable resource to guide future investigations, fostering the advancement of WAAM as a robust and efficient manufacturing technology. The review also underscores the importance of interdisciplinary approaches combining experimental and numerical methods to tackle the complex issues of RS in WAAM, aiming to enhance the performance and reliability of additively manufactured components.
引用
收藏
页码:420 / 449
页数:30
相关论文
共 50 条
  • [1] The qualitative analysis of warpage on residual stresses in wire arc additive manufacturing
    Singh, Chandra Prakash
    Sarma, Ritam
    Kapil, Sajan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 6619 - 6627
  • [2] Residual stresses in wire-arc additive manufacturing - Hierarchy of influential variables
    Wu, Q.
    Mukherjee, T.
    De, A.
    DebRoy, T.
    [J]. ADDITIVE MANUFACTURING, 2020, 35
  • [3] A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium
    Derekar, K. S.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (08) : 895 - 916
  • [4] Residual stresses in steel I-sections strengthened by wire arc additive manufacturing
    Kyvelou, P.
    Huang, C.
    Li, J.
    Gardner, L.
    [J]. STRUCTURES, 2024, 60
  • [5] Effects of Process Variants on Residual Stresses in Wire Arc Additive Manufacturing of Aluminum Alloy 5183
    Derekar, Karan S.
    Ahmad, Bilal
    Zhang, Xiang
    Joshi, Sameehan S.
    Lawrence, Jonathan
    Xu, Lei
    Melton, Geoff
    Addison, Adrian
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (07):
  • [6] Distribution of temperature and residual stresses in GMA-DED based wire-arc additive manufacturing
    Srivastava, Shekhar
    Garg, Rajiv Kumar
    Sachdeva, Anish
    Sharma, Vishal S.
    Singh, Sehijpal
    Gupta, Munish Kumar
    [J]. RAPID PROTOTYPING JOURNAL, 2023, 29 (10) : 2001 - 2018
  • [7] Distribution characteristics of residual stresses in typical wall and pipe components built by wire arc additive manufacturing
    Huang, Wenjia
    Wang, Qian
    Ma, Ninshu
    Kitano, Houichi
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2022, 82 : 434 - 447
  • [8] A Review of Challenges for Wire and Arc Additive Manufacturing (WAAM)
    Lei Huang
    Xizhang Chen
    Sergey Konovalov
    Chuanchu Su
    Pengfei Fan
    Yanhu Wang
    Pan Xiaoming
    Irina Panchenko
    [J]. Transactions of the Indian Institute of Metals, 2023, 76 : 1123 - 1139
  • [9] Wire arc additive manufacturing of aluminium alloys: A review
    Vimal, K. E. K.
    Srinivas, M. Naveen
    Rajak, Sonu
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 41 : 1139 - 1145
  • [10] A Review of Challenges for Wire and Arc Additive Manufacturing (WAAM)
    Huang, Lei
    Chen, Xizhang
    Konovalov, Sergey
    Su, Chuanchu
    Fan, Pengfei
    Wang, Yanhu
    Xiaoming, Pan
    Panchenko, Irina
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (05) : 1123 - 1139