Influence of Aggregate Properties on Skid Resistance of Pavement Surface Treatments

Skid resistance is a critical aspect for traffic safety since it significantly influences vehicle control and minimizes the distance required for emergency braking. The surface characteristics of pavements play a pivotal role in determining skid resistance. To achieve the optimal skid resistance performance, the pavement must sustain a specific level of friction. Thus, it is advantageous to apply surface treatments in areas that require enhanced friction. This study investigate the impact of factors such as the aggregate source, size, morphological properties, and abrasion levels on the skid resistance and frictional characteristics of a high-friction surface treatment (HFST). A complete investigation was conducted on HFST samples by analyzing the aggregate morphology using the Aggregate Image Measurement System and performing Micro-Deval abrasion testing. The skid resistance was evaluated with the British Pendulum Tester (BPT). The findings revealed that different aggregates and sizes exhibited varying behaviors post-polishing. Notably, fine-sized aggregates demonstrated higher British pendulum number (BPN) values, which indicate superior frictional performance. Models that predicted skid numbers based on the average texture and angularity indices initially demonstrated the balanced influences of both morphological properties before polishing. However, after polishing, the surface texture emerged as the primary determinant of the skid resistance, which overshadowed the angularity's impact.