Influence of Welding Tool Material and Type of Joint on the Formability of Friction Stir Welded Tailored Blanks

被引：0
|
作者：
Bachmann, M. [1 ]
Goebel, R. [2 ]
Riedmueller, K. R. [1 ]
Liewald, M. [1 ]
机构：
[1] Univ Stuttgart, Inst Met Forming Technol, Stuttgart, Germany
[2] Univ Stuttgart, Mat Testing Inst, Stuttgart, Germany
来源：
LIGHT METALS 2024 | 2024年
关键词：
Formability; Friction stir welding; Bending test; Tailor welded blanks;
D O I：
10.1007/978-3-031-50308-5_40
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Emerging process limits in sheet metal forming of tailored blanks are determined by the mechanical properties of semi-finished sheet materials to be joined and the type of weld seam. The weld seam properties in turn depend on the welding tool material and the utilized process parameters. In this study, tailored blanks were produced made of aluminum AA6016 (2 mm) and the steel grade DX54 (1 mm) as well as from AA6016 (2 mm) and HX380 (1 mm) using different welding tool materials such as steel and ceramics. The joint between both blanks was performed as a butt joint or combined lap-/butt-joint. The formability of the tailored blanks produced in this way was investigated using a three-point bending device. The tests carried out were evaluated with regard to the maximum bending force. Best results were obtained for tailored blanks produced with ceramic welding tools producing a combined lap-/butt-joint.
引用
收藏
页码：306 / 312
页数：7
相关论文
共 50 条
  • [1] Investigations on the mechanical properties and formability of friction stir welded tailored blanks
    Buffa, G.
    Fratini, L.
    Merklein, M.
    Staud, D.
    SHEET METAL 2007, 2007, 344 : 143 - +
  • [2] A study on the formability of aluminum tailor welded blanks produced by friction stir welding
    Parente, Marco (mparente@fe.up.pt), 1600, Springer London (83): : 9 - 12
  • [3] A study on the formability of aluminum tailor welded blanks produced by friction stir welding
    Parente, Marco
    Safdarian, R.
    Santos, Abel D.
    Loureiro, Altino
    Vilaca, Pedro
    Natal Jorge, R. M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (9-12): : 2129 - 2141
  • [4] A study on the formability of aluminum tailor welded blanks produced by friction stir welding
    Marco Parente
    R. Safdarian
    Abel D. Santos
    Altino Loureiro
    Pedro Vilaca
    R. M. Natal Jorge
    The International Journal of Advanced Manufacturing Technology, 2016, 83 : 2129 - 2141
  • [5] Modelling of friction stir welded tailored blanks
    Bachmann M.
    Riedmüller K.R.
    Liewald M.
    Suske V.
    Ilg C.
    WT Werkstattstechnik, 2022, 112 (10): : 661 - 665
  • [6] Influence of double-pass friction stir welding and blank position on formability of aluminum tailor welded alloy blanks
    Nukathoti, Raja Sekhar
    Vanthala, Varaha Siva Prasad
    Battina, N. Malleswararao
    Chirala, Hari Krishna
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, : 815 - 830
  • [7] Formability of Friction Stir-Welded Blanks with Different Thickness Ratios
    Kolahgar, Sina
    Ghaffarpour, Morteza
    Habibi, Niloufar
    Kokabi, Amir Hossein
    Akbarzadeh, Abbas
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (05): : 2177 - 2187
  • [8] Formability of Friction Stir-Welded Blanks with Different Thickness Ratios
    Sina Kolahgar
    Morteza Ghaffarpour
    Niloufar Habibi
    Amir Hossein Kokabi
    Abbas Akbarzadeh
    Metallurgical and Materials Transactions A, 2016, 47 : 2177 - 2187
  • [9] Friction stir welding of tailored blanks: Investigation on process feasibility
    Buffa, G.
    Fratini, L.
    Hua, J.
    Shivpuri, R.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 279 - 282
  • [10] Friction Stir Welding of Tailored Blanks of Aluminum and Magnesium Alloys
    Bergmann, Jean Pierre
    Schuerer, Rene
    Ritter, Kevin
    SHEET METAL 2013, 2013, 549 : 492 - 499
12345