Plastic collapse behavior of plate to CHS connection under biaxially symmetric load

This study investigates the plastic collapse behavior of a non-diaphragm type connection with flange plates connected to a circular hollow section (CHS) column, where four flanges were joined from two orthogonal directions. The analysis was conducted using the finite element method (FEM). The focus was on determining the collapse load of the flange joint under a biaxially symmetric load from the four flanges. In an initial numerical analysis, the fundamental collapse behavior of the cylindrical wall was explored. Finite element models of CHS tubes with perfectly elasto-plastic material properties were employed. The analysis revealed that the plastic collapse mechanism of the cylindrical wall was influenced by the axial force in the transverse flanges. Prediction equations for the collapse load of the joint were formulated, assuming four representative collapse mechanisms and employing the principle of virtual work based on the numerical analysis results. Additionally, the ultimate strength of the joint, determined by the plastic collapse of the cylindrical wall, was computed using finite element models of CHS tubes with realistic hardening properties. A comparison between predictions from the equations based on perfectly elasto-plastic CHS tubes and numerical solutions through finite element analysis (FEA) of CHS tubes with realistic hardening properties validates the accuracy of the proposed prediction equations, even when applied to realistic steel tubes.