Review on Formation Mechanism and Control Methods of Spatter in SLM

被引:0
|
作者
Qi, Liu [1 ,2 ]
Guang, Yang [1 ,2 ]
Jun, Yin [3 ]
Shuo, Zhao [1 ,2 ]
Da, An [1 ,2 ]
机构
[1] Shenyang Aerosp Univ, Sch Mechatron Engn, Shenyang 110136, Peoples R China
[2] Liaoning High Performance Met Reinforcement Mfg En, Shenyang 110136, Peoples R China
[3] Shenyang Aircraft Corp, Shenyang 110086, Peoples R China
关键词
SLM; defect; spatter; molten pool; POWDER-BED FUSION; THERMAL FLUID-DYNAMICS; MELT POOL; SINGLE TRACK; LASER; SPEED; BEHAVIOR; VAPOR; PLUME; SIMULATION;
D O I
10.12442/j.issn.1002-185X.20230301
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Selective laser melting (SLM) technology has been widely used in biomedical, aerospace, automotive and military manufacturing because of its short processing cycle and easy forming of complex components. However, due to the complex interaction between laser and powder in the forming process, the defects of laser selective melting parts show diversified characteristics, and SLM is more difficult to control, which limits the development and application of this technology to a certain extent. The research on the formation mechanism and control methods of spatter defects is one of the research hotspots in recent years. This paper summarizes the relevant recent research achievements. Taking powder, molten pool and forming layer as clues, this review expounds the spatter formation mechanism and control methods in the SLM process from four parts: the influence of spatter on formed parts, the cause of spatter formation, the monitoring and control methods and the future research directions, and the future development direction is proposed.
引用
收藏
页码:2094 / 2108
页数:15
相关论文
共 88 条
  • [1] AAnwar A B, 2017, Journal of Materials Processing Technology, V240, P388
  • [2] AAnwar A B, 2018, Additive Manufacturing, V22, P86
  • [3] Laser pre-sintering for denudation reduction in the laser powder bed fusion additive manufacturing of Ti-6Al-4V alloy
    Achee, Thomas
    Guss, Gabe
    Elwany, Alaa
    Matthews, Manyalibo
    [J]. ADDITIVE MANUFACTURING, 2021, 42
  • [4] ACunningham R, 2019, Science, V363, P849
  • [5] AJiang Huazhen, 2021, Acta Metallurgica Sinica, V34, P495
  • [6] ALeung C L A, 2018, Nature Communications, V9, P1355
  • [7] Alex ALeung Chu Lun, 2018, AAdditive Manufacturing, V9, P1355
  • [8] ALiu Y, 2015, Materials & Design, V87, P797
  • [9] Alkahari M R, 2014, Advanced Materials Research, V3160, P196
  • [10] ALott P, 2011, Physics Procedia, V12, P683