Sulfur as an effective sensitizer for natural rubber vulcanized via electron beam irradiation

A sensitizer or crosslinking promoter must be utilized to improve electron beam irradiation (EBI) vulcanization and achieve optimal results. This work investigated the effect of sensitizers, that is, sulfur and trimethylolpropane trimethacrylate (TMPT), on the properties of EBI-vulcanized natural rubber (NR). The experiments focused on analyzing the effect of different amounts of sensitizers, that is, 2 and 3 phr, on the swelling, crosslink density, entanglement, and mechanical properties of NR latex. A sample without sensitizers was taken as a reference. Results revealed that the crosslink density of the samples with sensitizers had improved compared with that of the sample without a sensitizer. The sample with sulfur exhibited higher crosslink density than the NR with TMPT. The sulfur-containing NR exhibited superior mechanical properties, i.e., modulus, tensile strength, and tear strength, as its crosslink density increased. In addition, increasing the sulfur content reduced the crosslink density of the NR latex, resulting in inferior mechanical properties. Furthermore, the different forms, that is, latex and film, of NR were compared. The latex form revealed higher crosslink density than the film form, thus presenting high mechanical properties because it contained water, which could induce the formation of free radical species and enhance crosslinking.