Corrosion resistance of FeCrMnxAlCu high-entropy alloys in 0.5M H2SO4 solution

In this study, FeCrMnxAlCu high-entropy alloys with varying Mn contents (x = 2.0, 1.5, 1.0, 0.5, and 0) were prepared using a vacuum arc melting furnace. The phase structure and microstructure of the alloys before and after corrosion were characterized via X-ray diffraction, scanning electron microscopy, and energy-dispersive Xray spectroscopy. The corrosion resistance of the alloys in a 0.5 M H2SO4 solution was comprehensively evaluated through potentiodynamic polarization, electrochemical impedance spectroscopy, immersion tests, white light interferometry, and X-ray photoelectron spectroscopy. Microstructural characterization results revealed that the FeCrMnxAlCu high-entropy alloys exhibited mixed FCC and BCC phase structures and featured typical dendritic and interdendritic regions. Corrosion tests indicated that as the Mn content decreased, the corrosion resistance of the high-entropy alloys improved, and the corrosion type transitioned from dendritic to interdendritic. Among these alloys, the FeCrAlCu high-entropy alloy exhibited the highest corrosion resistance, with the highest positive corrosion potential (Ecorr = -0.11 V), the lowest corrosion current density (Icorr = 1.02 x 10-5 A center dot cm2), minimal corrosion depth, and the lowest corrosion rate (0.1592 mm/y). After corrosion, a composite oxide protective film was formed on the alloy surface, effectively hindering further penetration of the H2SO4 solution and exhibiting excellent corrosion resistance.