Effects of thermal, stress, and electric fields on microstructure and ion distribution of (Mg 0.1 Mn 0.1 Co 0.1 Ni 0.2 Ti 0.1 Cu 0.1 Zn 0.2 )Fe 2.1 O 4 spinel ferrites

In this work, conventional sintering, hot-pressing sintering, and spark plasma sintering techniques were utilized to simulate the thermal field, thermal-stress field, and thermal-stress-electric field, respectively. The effects of these fields on the microstructure and cation distribution of the (Mg0.1Mn0.1Co0.1Ni0.2Ti0.1Cu0.1Zn0.2)Fe2.1O4 ferrite (HEF) material were comprehensively analyzed. The results indicate that in the temperature range of 1000-1100 degrees C, the thermal field provides the driving force for sintering, promotes grain growth (average particle size: 2 -> 7 mu m), and increases crystallinity degree. The stress field brings the particles into close contact with each other, facilitates diffusion, and delays grain growth (0.5 -> 5 mu m). The electric field reduces grain boundary energy, causes mass transfer, and makes the grains finer (0.5 -> 0.7 mu m) and more uniform. Mathematical model analysis reveals that the thermal field is beneficial to the random distribution of cations, which yields an inversion degree (gamma) of about 2/3 and increases the configuration entropy of HEF. The stress field leads to lattice distortion, permits ions with larger radius to occupy tetrahedral positions, and changes the cell parameters and oxygen position parameter of HEF. Finally, the interaction between electric field and crystal charges increases the electrostatic field energy, which promotes the formation of positive spinel structure and maximizes the crystal field stability energy. X-ray photoelectron spectra, Raman spectra, and change in lattice constant confirm the rationality of the mathematical model, and can be used to establish the model of the crystal structure under field effects.