The Influence of the Heat Flux of the Infrared Heater on the Charring Rate of Spruce Wood

The study investigates the determination of selected fire properties of spruce wood, specifically the charring rate, using a modified testing method described and registered at the Industrial Property Office of the Slovak Republic PUV 50121-2020, utility model no. 9373. The samples were exposed to a square ceramic infrared heater, FTE-750W, with a power output of 750 W, using which we determined the heat flux as a function of voltage (V). Spruce wood specimens with dimensions of 75 mm x 75 mm x 50 mm (l x w x h) were subjected to thermal exposure under heat fluxes of 10, 15, 20, and 25 kW center dot m-2. The charring rate was evaluated using two distinct approaches: the first method measured the thickness of the char layer formed after a duration of 1800 s, while the second method was based on reaching a temperature threshold of 300 degrees C. The findings demonstrated a positive correlation between the thermal load and the charring rate. The charring rates obtained using the first method ranged from 0.2397 to 0.6933 mm center dot min-1, whereas those derived from the second method varied from 0 to 1.0344 mm center dot min-1. This suggests that the 300 degrees C temperature criterion may not be a reliable parameter for calculating the charring rate. The precision of the results was corroborated through numerical simulations.