Finite-element modelling of interactions of needle with tympanic membrane and middle ear

The tympanic membrane (TM) is one of the most common routes to access the middle ear and inner ear for the treatment of hearing and balance pathologies. Since the TM is a soft thin biological tissue with small dimensions, using needles seems to be among the most practical interventional approaches. In this study, we proposed a finite-element (FE) analysis of needle-TM interactions that combines a 3D model of the TM and other main middle-ear structures in gerbil, and a 2D model of needle insertion into the TM based on the cohesive zone method (CZM). The TM was modelled using a 1st-order Ogden hyperelastic material and its properties were obtained by fitting to the experimental force-displacement plots of large deformation in the TM under needle indentation. The cohesive parameters were also acquired by calibrating the puncture force against the experimental data of needle insertion into the TM. These FE models were then used to obtain the deformation behaviour of the TM and other middle-ear structures due to the insertion force applied at different locations on the TM. Moreover, we investigated the effect of the TM thickness, the geometry of the needle (i.e., diameter and tip angle), and needle material on the insertion of needles into the TM. We also studied the penetration success of deformable needles.