Metal(loid)s Removal Response to the Seasonal Freeze-Thaw Cycle in Semi-passive Pilot Scale Bioreactors

There is an increasing demand for cost-effective semi-passive water treatment that can withstand challenging climatic conditions and effectively and sustainably manage mine-impacted water in (sub)arctic regions. This study investigated the ability of four pilot-scale bioreactors inoculated with locally sourced bacteria and affected by a freeze-thaw cycle to remove selenium and antimony. The bioreactors were operated at a Canadian (sub)arctic mine for a year. Two duplicate bioreactors were installed in a heated shed that was maintained at 5 degrees C over the winter, while two other duplicates were installed outdoors and left to freeze. The removal rate of selenium and antimony was monitored weekly, while a genomic characterization of the microbial populations in the bioreactors was performed monthly. The overall percentage of selenium and antimony removal was similar in the outside (10-93% Se, 20-96% Sb) and inside (35-94% Se, 10-95% Sb) bioreactors, apart from the spring thawing period when removal in the outdoor bioreactors was slightly lower for Se. The dominant taxonomic groups of microbial populations in all bioreactors were Bacteroidota, Firmicutes, Desulfobacterota and Proteobacteria. The microbial population composition was consistent and re-established quickly after spring thaw in the outside bioreactors. This demonstrated that the removal capacity of bioreactors inoculated with locally sourced bacteria was mostly unaffected by a freeze-thaw cycle, highlighting the strength of using local resources to design bioreactors in extreme climatic conditions.