Generation of inflow turbulence using an improved synthetic eddy method

The generation of turbulent inflow conditions is a key issue in large eddy simulation (LES) or direct numerical simulation (DNS). In this paper, an improved synthetic eddy method (SEM) is proposed to generate inflow turbulence for LES and DNS. The improvements about SEM focus on the eddy radius and eddy distributions. First, the eddy radius is improved to reduce the nonphysical vortex structure on the wall caused by overestimation of the radius. Second, a sampling method using Gaussian distribution is proposed to improve the distribution of eddies, which accurately captures the randomness of turbulent structure size and is close to the actual flow field. The improved method is applied to the direct numerical simulation of the supersonic turbulent boundary layer at Mach 2.7 and the 24 degrees compression ramp. Results indicate that the predictions yielded by the improved method are in good agreement with both DNS and experimental data. Compared to the original method, the improved method exhibits a more rapid recovery of the friction coefficient and effectively shortens the development distances. The improved SEM has enhanced the efficiency and accuracy of generating inlet turbulence, which can provide inlet turbulence boundary conditions for LES and DNS.