Ship Emission Measurements Using Multirotor Unmanned Aerial Vehicles: Review

This review investigates the ship emission measurements using multirotor unmanned aerial vehicles (UAVs). The monitoring of emissions from shipping is a priority globally, because of the necessity to reduce air pollution and greenhouse gas emissions. Moreover, there is widespread global effort to extensively measure vessel fuel sulfur content (FSC). The majority of studies indicate that more commonly used methods for measuring ship emission with UAVs is the sniffing method. Most of the research is concerned with determining the fuel sulfur content. Fuel sulfur content can be determined by the ratio of CO2 and SO2 concentration in the exhaust gas plume. For CO2, the non-dispersive infrared (NDIR) method is used, the most common measuring range reaches 0-2000 ppm, the overall measuring range 0-10,000 ppm, and detection accuracy is +/- 5-300 ppm. For SO2, the electrochemical (EC) method is used, the measuring range reaches 0-100 ppm, and the detection accuracy is +/- 5 ppm. Common UAV characteristics, used in measurement with ships, involve the following: 8-10 m/s of wind resistance, 5-6 kg maximum payload, and a flight distance ranging from 5 to 10 km. This can change in the near future, since a variety of emission measuring devices that can be mounted on UAVs are available on the market. The range of available elements differs from device to device, but available ranges are allowed and the accuracy provides good possibilities for wider research into ship emissions.