Analysis of Mechanical Properties of Fiber Reinforced Concrete Using RCC and PCC

The addition of macro fibers to concrete pavements has been used to improve the cracking of concrete pavement, reduce slab thickness and contribute to increasing the joint spacing. A laboratory test was carried out in the study to analyze the impact of fiber reinforced concrete (FRC) on plain cement concrete (PCC) and roller compacted concrete (RCC), determining the flexural strength by performing ASTM-1609 tests and compressive strength by ASTM C-39 tests. Two synthetic fiber types selected with different geometries and different dosages (0.25% and 0.5% by volume) were tested for both RCC and PCC. To examine the effect of fiber contents and property, statistical testing was done using strength-test data. The test result showed that flexural strength was not affected by fibers. As fiber content increased, both residual strength (F600 and F150) and specimen toughness (T150) increased for each fiber type. To the contrary, the compressive strength of specimens with higher fiber contents was lower in every case. Fiber properties including length and shape affected the residual strength of RCC more, than PCC. It is notable that the residual strength of RCC and PCC with the same fiber condition is very similar, even though the mix design and compressive and flexural strengths are different. In this paper, the strength-test data results are discussed, and the factors affecting the test results and the limitations of the testing methods are suggested.