A composite motion control method for quadruped robots in trot gait

This work aims to address the issues of instability in trot gait walking and poor terrain adaptability in rugged environments under conventional control strategies for quadruped robots by proposing a novel composite control strategy. During the support phase, a separated force-position mixing control method is employed, utilizing gravity-compensated PD (Proportional Derivative) control at the lateral swing and knee joints while employing position control at the hip joint. During the swing phase, VMC (Virtual Model Control) is used to construct three sets of virtual spring-damper components, guiding the foot to move along a predetermined trajectory and converting virtual forces into joint torques for the swinging leg. At the body, IMU (Inertial Measurement Unit) feedback data combined with PI (Proportional Integral) control is used to adjust leg length and maintain the robot's posture stability. Finally, the proposed separated force-position hybrid control method is theoretically validated using the Lyapunov stability criterion, and simulation tests on flat and rugged terrains under the quadruped robot's composite control method are conducted using MATLAB/Simulink, comparing it with the VMC and position control methods. The findings indicate that the composite control strategy leads to smaller changes in the attitude angles and reduced impact forces at the feet during the quadruped robot's walk on flat ground while also demonstrating strong adaptability to rugged terrains.